Gtran N150 From Digitel Venezuela

[JAVIER_ESPINOSA]

MR. INFINITY FOR UPLOAD IN SUPPORT FIRMWARE FOR GTRAN N150 DIGITEL VENEZUELA.

http://rapidshare.com/files/102600962/backup_flash_KCM_PCB01_GPRS_MT6227_S01.MAUI_06A_W0 6_44_MP_V20.BIN__part_1_of_1_20080326-143340.B0X.r.html

BEST REGARDS

[InfinitySupport]

Hello,

Thank you very much !

Is it was sp-locked or simfree phone ?
Please, post here pinout information.

[JAVIER_ESPINOSA]

Hello,

Thank you very much !

Is it was sp-locked or simfree phone ?
Please, post here pinout information.

the pinout is the same of gtran n120 and the flash have sim lock, can you help me to unlock and i cant unlock n120 can you help me

[InfinitySupport]

Hello,

Please, download latest software for test here: http://www.infinity-box.biz/download/public/InfinityUpdate_MModule_v2.15.rar
Please, try to unlock N120 by different methods (it was made some improvements). Please, let me know about results.

[JAVIER_ESPINOSA]

==== log opened: [27/03/2008 09:53:54 a.m.] ====
Application: C:\Archivos de programa\InfinityBox\MModule\MModule.exe
Loading data, wait...
[Infinity Box] v2.15
S/N: 233F:010E
Wait...
Device: Gtran N120
Done
COM3 [VCP0] selected
Device: Gtran N120
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6227:8A02:8A01]...
CPU: MT6227
chip: 0031:0541:0884
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: KCM_PCB01_GPRS_MT6227_S01.MAUI_06A_W06_44_MP_V20.B IN
ver. sw2: MAUI.06A.W06.44.MP.V20, 00000000
ffs offset/size: 00E00000/001E0000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[KCM_PCB01_GPRS_MT6227_S01.MAUI_06A_W06_44_MP_V20.B IN]]...
file saved: C:\Archivos de programa\InfinityBox\MModule\backup_eeprom[KCM_PCB01_GPRS_MT6227_S01.MAUI_06A_W06_44_MP_V20.B IN]_20080327-095821.B0E.bin
flash: 89881500010001:89881500000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
detecting additional parameters...
.................................................. ..............
error: additional parameters detection failed
detecting additional parameters...
..............................................
flash: 89881500010001:89881500000000
flash: 89881500010001:89881500000000
Write: area 1/1
..................
additional parameters detected Ok
Special operation Done
Write...
flash: 89881500010001:89881500000000
Write: eeprom
Write Done
Finalization...
Finalization Done
Finished, time used: 357 sec
Remove/Install battery now !
COM3 [VCP0] selected
Action: read codes
unlock method: read codes
Model: Gtran N120
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6227:8A02:8A01]...
CPU: MT6227
chip: 0000:0000:0000
error: initialize step#1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method
error: operation failed !
Finished, time used: 19 sec
Remove/Install battery now !
COM3 [VCP0] selected
Action: read codes
unlock method: read codes
Model: Gtran N120
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6227:8A02:8A01]...
CPU: MT6227
chip: 0031:0541:0884
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6227,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.44.MP.V20
Version: J2_MAIN_Rev02
42 byte(s) read
imei: 35552200161977
connection Ok
148 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 0000
Finished, time used: 10 sec
Remove/Install battery now !

look at this when i use standard unlock appear unlock but not, when i unlock way read codes apper is unlocked but whan i insert any sim include digitel sim the phone say invalid sim card, i try to change imei and change but still locked

[InfinitySupport]

Hello,

Thanks a lot for test report, we will try to fix it ASAP, hope to give you new software very fast.

[JAVIER_ESPINOSA]

i change imei on 2 n120 and work fine, i change imei on a n150 and work fine, i think that the problem is when i try to unlock

[userinfinity]

i cant unlock this model of Gtran N120, como lo desblokeo

No me interesa lo de cambiar imei solo unlock

[InfinitySupport]

Hello,

If somebody can send to us locked N120 or N150 for test, please, contact to Infinity-Box forum member or by e-mail: InfinityBoxSupport@gmail.com
We will pay for phone + delivery.

Thank you !

[userinfinity]

como introducir NP code en Gtran N120?????

[InfinityHelp]

hello mr. userinfinity!

can send to us locked N120 or N150 for test ?
will pay for delivery+ phone price

[shak_jon]

i change imei on 2 n120 and work fine, i change imei on a n150 and work fine, i think that the problem is when i try to unlock

How??? change imei in this 2 models.... explain me please done with box or free... how???

[shak_jon]

i change imei on 2 n120 and work fine, i change imei on a n150 and work fine, i think that the problem is when i try to unlock

How??? change imei in this 2 models.... explain me please

[InfinitySupport]

How??? change imei in this 2 models.... explain me please done with box or free... how???


Hello,

I am very sorry to remind you, but you have made your post in Infinity-Box support forum.
So if you need to make required operation you need to have Infinity-Box.
You can get more details here:
www.infinity-box.com (http://www.infinity-box.com)
www.infinity-box.biz (http://www.infinity-box.biz)