5310 nmm3 can't write imei

[BENCHENA]

hi

chinease 5310 nmm-3 cant' format and can't write imei it's not dead phone

see the two logs

COM6 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7C03:0005
Connecting, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25error: detection failed (26 tries), read flash and send to support
connection Ok
building list...
done
no items found
error: operation failed !
Finished, time used: 21 sec


COM6 [VCP0] selected
Action: imei
imei write method: mode-2
new imei: 359400801029017
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7C03:0005
Connecting, wait...
Release Power button now !
Phone detected, wait...
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25error: detection failed (26 tries), read flash and send to support
connection lost
error: operation failed !
Finished, time used: 14 sec

it seems to be new version not supported "SHINEC25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_16 _L5_MP4_MY_V1_2"

backup full flash readed and upload in progress to send to infinitysupport

COM6 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:7C03:0005
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: SHINEC25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_16 _L5_MP4_MY_V1_2.BIN
ver. sw2: MAUI.06B.W07.16_L5_mp4_MY_V1.2, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[SHINEC25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_16 _L5_MP4_MY_V1_2.BIN]]...
file saved: D:\Program Files\InfinityBox\ChineseMiracle\5310\backup_flash[SHINEC25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_16 _L5_MP4_MY_V1_2.BIN]_20080329-174600.B0M.bin
Finished, time used: 700 sec
Remove/Install battery now !


strange thing when i fill the 14 digit number in infinity soft the 15 number don't fit with the one written in the back side of the phone under the battery ???????

wait for help !!!!!!!!!

[BENCHENA]

full flash backup already sent to infinitysupport ;)

[BENCHENA]

is there any changes about this phone in the update released today (v2.36) ?

[InfinityHelp]

hello!

did you try imei repair method -3?
last imei digit (15th) is calulated automaticly

[InfinityHelp]

it is calculated by correct algo, some chinese phones have wrong last digit
this also can cause faulty work in some networks
Infinity soft use correct way to calculate this digit, so dont worry if it does not match original

[BENCHENA]

hello!

did you try imei repair method -3?
last imei digit (15th) is calulated automaticly

what about format process ???

[InfinityHelp]

hello!

Can you specify your question?

[BENCHENA]

hello!

Can you specify your question?

infinity program can't' format can't do anything exept reading flash !!!!!!

how to sucess these oprations with infinity see the logs to understand


at any operation except reading flash the phone power on and off

[InfinityHelp]

hello!

please try IMEI reapir method-3
and also Complete format instaed of Safe.

[BENCHENA]

hello!

please try IMEI reapir method-3
and also Complete format instaed of Safe.

ok i will try and post result :)

[BENCHENA]

tested and work fine thank you infinityhelp :)