How to use Pinfinder with chinese phone

[kabo tel]

step 1 : Open the InfinityBox PinFinder from your desktop .

step 2 : select the serial prot to use with box

http://www.gsmhosting.com/vbb/attachment.php?attachmentid=146995&stc=1&d=1206875634

Step 3 : Detect adapter ( to conect with box )

http://www.gsmhosting.com/vbb/attachment.php?attachmentid=146997&stc=1&d=1206876311

step 4 : select your cable use with chinese phone

http://www.gsmhosting.com/vbb/attachment.php?attachmentid=147007&stc=1&d=1206877477
Step 5 : select the CPU name ( More chinese use MT62XX (( autodetect )) )



http://www.gsmhosting.com/vbb/attachment.php?attachmentid=147008&stc=1&d=1206877477
conect cable in adapter & conect power cable to phone

STEP 5 : press th Find it & press and hold Power button ( After infomation massege )
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=147011&stc=1&d=1206914385

In Final waiting for pinout detect by adapter .


note : U can select other CPU name after phone not detuct by MT62XX

[InfinityHelp]

hello guys!

Thank you for posting this tutorial.
It is very useful for quick "guide in" to pin finder use.
More detailed info you always can find in pinout finder user manual available here:
http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf

also one correction to post above:
CPU model must be set according to CPU used in phone.
if pinout was not found with this type of CPU- no point to repeat search with other type.
Just reffer to trubleshooting chapter in user manual.
if you did all correctrly but still pinout can not be found- it is not presented in system connector,
so you must focus on search test points on PCB