N73 RM-133 BIG problem

[karimgsm]

I just make format to one N71 RM-133 with chinese miracle V2.36
but after i have white screen:confused: i try to make eeprom beckup but no result any solution please:confused:

[mansi]

whats phone orginal firmware??
check the log file.

BR
Mansi

[karimgsm]

original flash is CM_Nokia-N73-1-RM-133_JCJ_H252608CT_SK3_CO6R_GI9[1].DB02_JCJ00_966D_ C_V2_2DTEST--070919_16m_En_Ru_Fr_De_Id_Vn_Ar.B0M it's N73 i flash the phone with the same flash but same problem white screen :confused:

[mansi]

weard, lemme explane something
1st- the phone should not be damaged by FFS format
2nd- if you flashed the phone with same version which was on your phone, it should work 100%.
3rd- if the phone can send and receive calls, then probably you have some hardware problem.
do u have another phone [same hardware, and software] if yes, try to read full flash from the working one and flash it to the other phone with the white lcd problem.
if nothing is changed, then put the working LCD on the damaged phone to check the hardware.


BR
Mansi

[InfinityHelp]

hello guys!

i think mr. karimgsm must spend some time on checking operation.log file.
find operations which he did with this phone and compare or even better- post it here.
there are many flash file versions which look exactly same, but have difference just in 1-2 letters.
so lets focus one more time on Original phone version

[karimgsm]

ok here is the log file


==== log opened: [30/03/2008 16:28:27] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.36
S/N: 10AF:010E
Wait...
Device: Autodetect 6205-6227 NOR
Done
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 30 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C67E:E360
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.140CB857.[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN_52CCD78E].rpl
identification#1 detection finished
device-id: 140CB857
identification#1 protocol ver: 05
ver. sw1: JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN
ver. sw2: DB02_JCJ00_966D_C_V2.2DTEST, 712833AD
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 04227E22212200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]_20080330-165033.B0E.bin
flash: 04227E22212200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 04227E22212200:2BEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-165139.B0X.bin
Finished, time used: 416 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
COM5 [VCP0] selected
Action: imei
imei write method: mode-2
new imei: 352759010945603
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C67E:E360
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: DB02_JCJ00_966D_C_V2.2DUXAR
Version: JCJ_H252608CT_SK3_CO6R_GI9
detecting structure #2...
0done
44 byte(s) read
imei: 13579024681122
connection Ok
detecting structure #2...
0done
44 byte(s) read
verification...
verification done: 35275901094560
Finished, time used: 20 sec
Remove/Install battery now !

==== log opened: [30/03/2008 17:26:52] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.36
S/N: 10AF:010E
Wait...
Device: Autodetect 6205-6227 NOR
Done
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C67E:E360
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.140CB857.[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN_52CCD78E].rpl
identification#1 detection finished
device-id: 140CB857
identification#1 protocol ver: 05
ver. sw1: JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN
ver. sw2: DB02_JCJ00_966D_C_V2.2DTEST, 712833AD
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 04227E22212200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]_20080330-174013.B0E.bin
flash: 04227E22212200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 04227E22212200:2BEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-174246.B0X.bin
Finished, time used: 497 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
Loading file v.02...

==== log opened: [30/03/2008 17:50:52] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.36
S/N: 10AF:010E
Wait...
Device: Autodetect 6205-6227 NOR
Done
Loading file v.02...
backup_eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]_20080330-165033.B0E.bin loaded
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
skip: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C67E:E360
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.140CB857.[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN_52CCD78E].rpl
identification#1 detection finished
device-id: 140CB857
identification#1 protocol ver: 05
ver. sw1: JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN
ver. sw2: DB02_JCJ00_966D_C_V2.2DTEST, 712833AD
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 04227E22212200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]_20080330-175803.B0E.bin
flash: 04227E22212200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-175819.B0X.bin
Area: Eeprom/ffs
flash: 04227E22212200:2BEA0000000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-180154.B0X.bin
Finished, time used: 590 sec
Remove/Install battery now !
Loading file v.02...
CM_Nokia-N73-1-RM-133_JCJ_H252608CT_SK3_CO6R_GI9[1].DB02_JCJ00_966D_C_V2_2DTEST--070919_16m_En_Ru_Fr_De_Id_Vn_Ar.B0M.bin loaded
identification#1 protocol ver: 05
ver. sw1: JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN
ver. sw2: DB02_JCJ00_966D_C_V2.2DTEST, 712833AD
You have loaded file with security features enabled.
detecting languages...
Languages: En Ru Fr De Id Vn Ar
COM5 [VCP0] selected
error: can't open COM5
COM5 ready
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:C67E:E360
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 04227E22212200:2BEA0000000000
flash: Fujitsu AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.140CB857.[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN_52CCD78E].rpl
identification#1 detection finished
device-id: 140CB857
identification#1 protocol ver: 05
ver. sw1: JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN
ver. sw2: DB02_JCJ00_966D_C_V2.2DTEST, 712833AD
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 04227E22212200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]]...
file saved: C:\Documents and Settings\redha\Bureau\backup_eeprom[JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V2_2D TEST--070919.BIN]_20080330-181131.B0E.bin
flash: 04227E22212200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-182140.B0X.bin
Area: Firmware
flash: 04227E22212200:2BEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _140CB857_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919.BIN_52CCD78E_20080330-184602.B0X.bin
Finished, time used: 2415 sec
Remove/Install battery now

[mentari]

I just make format to one N71 RM-133 with chinese miracle V2.36
but after i have white screen:confused: i try to make eeprom beckup but no result any solution please:confused:

what is the phone condition before make format??

note to you, always do a full backup before do any operation, because this is important, if something happen just write back the full backup.

[karimgsm]

phone is no network before i make format and infinity make automatique beckup and i mke beckup eeprom and full flash but the same prb i read one full flash from one N73 with the same firmware but no result:mad::confused: the phone have a good screen befor iu make format

[InfinityHelp]

hello!

i think you must restore your backups, get phone original state (no network) and try to write different valid IMEIs

[karimgsm]

PLEASE INFINITY as i tel u i allready restore beckups no result and read full flash from one phone with the same firmwair but my prb is not solved:( ;;;;; i m not new with china phones customer want his phone what can i do his phone is damaged

[InfinityHelp]

hello!

well, as long as you are sure that this is your original version:
JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_96 6D_C_V2_2DTEST--070919
and flsah file from support not help:
flashfiles/ChineseMiracle/_MT6226/CM_Nokia-N73-1-RM-133_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00_966D_C_V 2_2DTEST--070919_16m_En_Ru_Fr_De_Id_Vn_Ar.B0M.bin

then, if this is software problem, for sure must help full backup downloaded from other phone.
can you upload this flash file (which you said you used also) to www.rapidshare.com
i will check this file

[karimgsm]

ok master this is the link with flash readed from one worked phonehttp://rapidshare.com/files/104494914/backup_flash_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00 _966D_C_V2_2DTEST--070919.BIN__20080331-161324.B0M.html

[InfinityHelp]

hello!

i just checked file- it looks normal.
by my oppinion- if phone with original backup written and also with another working dump still show empty LCD- it is time to check phone's hardware

[.::BHATTI::.]

ok master this is the link with flash readed from one worked phonehttp://rapidshare.com/files/104494914/backup_flash_JCJ_H252608CT_SK3_CO6R_GI9.DB02_JCJ00 _966D_C_V2_2DTEST--070919.BIN__20080331-161324.B0M.html


bro Never do N73 Rm-133 Complete format FFS... u will have this white screen.... i have tried many of them ... always do safe format FFS.. as infinty peoples told u so .. do safe format FFS first ...


and do write ur old eeprom . it will get ur phone to original position ..and then u can make safe format ...

[karimgsm]

ok thank's bro i will try to restor eeprom beckup and safe format;)

[gsmsikar]

bro Never do N73 Rm-133 Complete format FFS... u will have this white screen.... i have tried many of them ... always do safe format FFS.. as infinty peoples told u so .. do safe format FFS first ...


and do write ur old eeprom . it will get ur phone to original position ..and then u can make safe format ...
if any n73 comes to white after doing full format and there is no eeprom backup then is there any solution to revive it back ?

[InfinityHelp]

hello mr. gsmsikar!

flashing must be done for solving this proiblem.
can you find same working phone and read out full flash?
you can use this flash file for restoring your faulty phone

[.::BHATTI::.]

if any n73 comes to white after doing full format and there is no eeprom backup then is there any solution to revive it back ?


Flashing can do it for u ............ but u will be needing to find the exact version ./.

[gsmsikar]

i have a n73 copy

Type RM-133
Model N73-1
Code 0504490

when i read the detailed information then i get this result..

COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:067A:F8D6
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: H526_05C_PCB01_GPRS_MT6226_S01.G738_20070823_V5_7. BIN
ver. sw2: G738_20070823_V5.7, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
.................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
.................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Finished, time used: 158 sec
Remove/Install battery now !


now the problem is i am unable to get the same version of flash file , now please tell me can i use any mt6226 based flash file ?

the problem in the set is it is in white screen and all the other options are working ok ...

please help me ..

thanks

[InfinityHelp]

hello!

no, you can not use just any flash file.
file must be from exactly same phone in order to reapir it

[gsmsikar]

then can i get this flash file ?



ver. sw1: H526_05C_PCB01_GPRS_MT6226_S01.G738_20070823_V5_7. BIN
ver. sw2: G738_20070823_V5.7, 00000000

[InfinityHelp]

hello mr. gsmsikar!

unfortunately we dont have exactly same version on support
can you find same working phone and read out full flash?
you can use this flash file for restoring your faulty phone

[gsmsikar]

no sir i dont have any phone with same version

i have read the file from this set which is in white screen , can it be repaired ?

http://rapidshare.com/files/140552875/flash_H526_05C_PCB01_GPRS_MT6226_S01.G738_20070823 _V5_7.BIN__20080825-154308.B0M.rar.html

http://rapidshare.com/files/140553682/eeprom_H526_05C_PCB01_GPRS_MT6226_S01.G738_2007082 3_V5_7.BIN__20080825-154705.B0E.rar.html

[gsmsikar]

sir this file is available

H526_05C_PCB01_GPRS_MT6226_S01.P02_SP_SSD_NB0_12_0 TMC1_26B__Nokia-8600_16m_En_Fr_Vn_Ru_Ar_Th


can it work ?
should i try or not ?

[InfinityHelp]

hello!

you can try this flash file or any other, just always before such test make full backup