Ztc Zt8600

[Bagrat]

Hi. I need help , need pinout for ZTC ZT8600 .
Thank you

[rk19801]

hi friend pls post connctor type, how many pin & gnd pin location......

[Bagrat]

it haave \1....20/ conector , and have 2 CPU (

[Bagrat]

heare th ZT8600 pictures
please anebody help me :mad:

[stanner_austin]

@Bagrat

7: rx or tx
8: tx or rx

check with meter pin voltage..
its simple method to detect most of all cpu pinout.

voltage is man reason and main thing that all pin finding tool using..

[Bagrat]

Thank you, but thish phone have 2 CPU. I must replase second for flashing ?

[stanner_austin]

Thank you, but thish phone have 2 CPU. I must replase second for flashing ?
99% mtk china phone repair with reformatting or customize or rebuild eeprom or format ffs i mean.
first always make backup of full flash
then do anything
do operation on 1 cpu first
then if same then you have to do same operation at 2 cpu.

[aleem26]

COM4 [VCP0] selected
Device: ZTE-125
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now !
loading...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sta_20080401-181901.B1E.bin
loading data...
wrong database file: C:\Program Files\InfinityBox\Pana01\z225_eep65535.cfg
error: can't load database v.11
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sec_20080401-181903.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-complete_20080401-181911.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 40 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

[Bagrat]

must i remove second cpu for formating first ?

[stanner_austin]

must i remove second cpu for formating first ?
NO MAN
READ THIS
http://forum.gsmhosting.com/vbb/showthread.php?p=3203976#post3203976

already reply you.