K810 blinking lcd after repair by dreambox

[meisam]

Hi masters;
Got a K810 phone identified as K700 by setool.Tried flashing by setool and no result.Turned to my Dreambox,all TP done ok,tried unlock and repair as u can see the log below,all things seem ok as u see in phone info below.
What's problem?here u go:
Phone powers on with white lcd then blinking repeatedly :confused:
What could be the cause?
Unfortunately "though shouted many times and nobody helped" i can't login to support.Thus tried flashing with setool but still the same problem. :confused:


-- Unlock and Repair----------------------------------------------------------
User selected phone K810 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357994-01-916020-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 23806A761540A3DF
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.


--- Reading Info---------------------------------------------------------------
User selected phone K810 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357994-01-916020-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 23806A761540A3DF
Flash Chip : Intel 48F50xxM0Y0
Flash Chip ID : 887E0089
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK

Done.

[GSM Dream]

Read fullflash from the working W850 (using testpoint)
after doing the following steps

"Security Bypass" Operation must be executed.

1. Open fullflash
2. Select in model list - W810
3. Select Access Mode - Security Bypass
4. Go to Misc tab & Write Full Flash (look in p.#1)
5. After flashing go to Security tab & make "Unlock & Repair GDFS Sec. Blc."
6. Flash Main+FS+Custpac.

If after thats all operation Your phone is steel blinking so it is Hardware problem, any Box can't help You.

[meisam]

Read fullflash from the working W850 (using testpoint)
after doing the following steps

"Security Bypass" Operation must be executed.

1. Open fullflash
2. Select in model list - W810
3. Select Access Mode - Security Bypass
4. Go to Misc tab & Write Full Flash (look in p.#1)
5. After flashing go to Security tab & make "Unlock & Repair GDFS Sec. Blc."
6. Flash Main+FS+Custpac.

If after thats all operation Your phone is steel blinking so it is Hardware problem, any Box can't help You.

:confused::confused::confused::confused:

R u sure this is answer to my question?
Anybody have K810 CID52 firmware in acceptable format for dreambox?Where can i get it plz?

[Platijet]

your phone has hardware problem-check lcd- lcd esd filters and lcd connector.

[meisam]

This is after repair by dreambox (info read by setool):

OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401916020 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K810i
Brand:Generic
MAPP CXC article: R1KC001 prgCXC1250811_GENERIC_SM
MAPP CXC version: R1KC001
Language Package:EUROPE_4
CDA article: CDA111111/DEV
CDA version: R2A
Default article: cxc1250813
Default version: R1KC001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE NOT PRESENT
"R1KC001_CXC1250811_GENERIC_SM"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

And here again:

OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401916020 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM
MAPP CXC version: R1KG001
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version:
Default article:
Default version:
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

[c_ahmad79]

brother
write gdfs with se-tool and then repair gdfs with dream box again
make gdfs backup before writing
coz in your log it show model k700
write new gdfs
and post reply

[Medved]

This is after repair by dreambox (info read by setool):

OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401916020 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K810i
Brand:Generic
MAPP CXC article: R1KC001 prgCXC1250811_GENERIC_SM
MAPP CXC version: R1KC001
Language Package:EUROPE_4
CDA article: CDA111111/DEV
CDA version: R2A
Default article: cxc1250813
Default version: R1KC001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE NOT PRESENT
"R1KC001_CXC1250811_GENERIC_SM"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

And here again:

OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401916020 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM
MAPP CXC version: R1KG001
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version:
Default article:
Default version:
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

NO Your phone havn't HW problem. Your problem is GDFS. You must write full GDFS in Your phone and than make "Unlock & Repair GDFS Sec. Blc."
After that flash Main+FS+Custpac

[taihv]

Hmm, the same for me with W830! My customer has a mistake when flashing w850 FW and GDFS on it!
After full repair + full flash with DreamSE, phone still white blink and setool always show K700 model in GDFS. Write full GDFS via setool can solve "K700 problem" when indentify, but can not solve white blink problem!

[sharaz191]

Model:K700

still you have GDFS problem.Repair it again

[meisam]

All guys,
Anybody have good GDFS for K810 for setool or Dreambox?
Plz i need it.

[Farrass]

All guys,
Anybody have good GDFS for K810 for setool or Dreambox?
Plz i need it.

http://forum.gsmhosting.net/vbb/showpost.php?p=3199879&postcount=32

[shan969]

sir i have same problem in your phone ...but my phone i just download the software in the setools support then reprogram it in the setool...and then now it fine i already have same prob i did not touch the gdfs ....
100% ok i hope in your part it will ok too...




good luck....just try......

[kevin168]

have same problem here...
but in K800 phone..

it seems to be hardware failure,
i try to repair with DB, still same problem.
until i try to change flash ic and do empty fill with setool, but the problem still remain...

always show K700 phone when identify...

br,
kevin168

[BABAK NURI]

All guys,
Anybody have good GDFS for K810 for setool or Dreambox?
Plz i need it.

Hi
i have same problem,but after write gdfs & unlock/repair flash with dream box using normal mode.all will be ok

[meisam]

Mr Nuri,I can't login to dreambox support and nobody cares,can u upload k810 firmware for me ....

[nova75c]

@meisam
if all ok , you have to change LCD . Tested by me one time.If LCD bad , phone blink same as GDFS damage!

[m_amien]

@meisam
if all ok , you have to change LCD . Tested by me one time.If LCD bad , phone blink same as GDFS damage!

K810 with Broken LCD and white blink.
identify with Setool like this.


v0.914031/UNI
CARD SERIAL: ******x
Loaded 51 flash descriptors
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101321207 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K700
Brand:GENERIC APAC
MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R2A
Default article: cxc1250813
Default version: R1KG001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed: 25 secs.

and I try to Repair GDFS using Dreambox,
Here my log with Dreambox !


--- Unlock and Repair----------------------------------------------------------
User selected phone K810 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359451-01-321207-3
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 23801B7C15706B4E
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

and Identify again using Setool:rolleyes:


v0.914031/UNI
CARD SERIAL: *********x
Loaded 51 flash descriptors
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101321207 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K810i
Brand:GENERIC APAC
MAPP CXC article: R1KG001 prgCXC1250904_CHINA_SM
MAPP CXC version: R1KG001
Language Package:APAC
CDA article: CDA102568/101
CDA version: R2A
Default article: cxc1250813
Default version: R1KG001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE NOT PRESENT
"R1KG001_CXC1250904_CHINA_SM.zip"
YOU MUST FLASH SUPPORTED FIRMWARE
TO USE "ALTERNATIVE SECURITY BYPASS"

Elapsed: 28 secs.

Phone On with Still White Blink... and must remove battery for Turn OFF:mad:

@nova75c you right.. thx for this info.

Since I read "If LCD bad , phone blink same as GDFS damage! " :confused:
and change LCD.........huuuuh...... finally my phone is OK now.:D

[Medved]

Hmm, the same for me with W830! My customer has a mistake when flashing w850 FW and GDFS on it!
After full repair + full flash with DreamSE, phone still white blink and setool always show K700 model in GDFS. Write full GDFS via setool can solve "K700 problem" when indentify, but can not solve white blink problem!


Your phone have HW problem - flex cable. Try with work W850 or W830 - disconnect flex cable from Main PCB & read Info (Identify) by SeTool, phone will be K700 if You connect Flex cable back in LOG You see W850(830) again.

[matin-gsm]

all you guys wrong ,
check back of LCD , you will see something like this " RNH 942 271 "
these new LCDs requires R8BF003 firmware .

try it .

[microtel]

I had a same problem too with K800, wite blinkibg after red blinking repair, so i changed a lcd and all was OK! unbeliveble but itst true:)

[KOBOL]

no need change lcd only flash new firmware and all is ok

[asghar61]

hi maisam
i have any problem similer to you
but that resolve
you can tell to me for your answer
09171251510