w200 unlock tp hangs

[gerry1970]

connect tp's and screen hangs at waiting have tried 5 phones same problem on all. had done ten before without problems.

[GSM Dream]

Hello!
Please, explain problem more detailed.

[gerry1970]

phone connected to dream box loads to point where ask for tp's when tp attached says connected and then waiting but hangs at that point and will not go any further.

[GSM Dream]

I'm not well understand your problem.
Can you post some logs with descriptions and/or screenshot of DBSS in error state?

[gerry1970]

ok will post screen shot when next one fails. the problem is at stage one security bypass stage test points are connected and show as connected on software but screen just stays at screen showing test point picture showing waiting on the progress bar. will not progress to point where asks to remove test point.

[GSM Dream]

1. Wrong pin
2. Try to change testpoint sensitivity.

[gerry1970]

1. pin 27
2. have tried

it says connected and starts to work but then stops. i have done ten in the last few days before it started doing this used the same pins and sensitivity

[DreamSupporter]

Did you check if this pin is clean? Maybe you need to remove glue from it.