Sigmatel S-3 Headset Mode [Archive]

rkinfo_imran

04-09-2008, 22:38

prakashvachhani

05-26-2008, 14:46

I have also Sigmatel S3 model. But Internet browser is not there. And mobile does not go to vibration mode. Can anybody help?

bhatt

06-02-2008, 15:58

HI
i have chinese phone SIGMATEL S-3 with headste mode
it has 2/6 pin charging connector with 2-sim
i have the charging connector but same problem it doent have
seprate headset connector handsfree has to be used in
same charging connector

need help
regards
rkinfo_imran
-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hi, i m Nayan try this on ur mobile *### then on ur screen it will show 5 option select factory mode & in it select option 13 charger & press ok. see if it works. give replay on galanayanh@rediffmail.com (galanayanh@rediffmail.com) bye ;).

kamalakar

06-03-2008, 12:29

brother i have also same problem with sigmatel T99

shuaib_kashish

06-07-2008, 17:43

-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hi, i m Nayan try this on ur mobile *### then on ur screen it will show 5 option select factory mode & in it select option 13 charger & press ok. see if it works. give replay on galanayanh@rediffmail.com (galanayanh@rediffmail.com) bye ;).

thanks brother,
i have same problem, i try it but i coud'nt success,
i think it is hardware problem.
please guide me .
thanks too much in advance

SHIJILFONOTLY

06-09-2008, 08:17

-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hi, i m Nayan try this on ur mobile *### then on ur screen it will show 5 option select factory mode & in it select option 13 charger & press ok. see if it works. give replay on galanayanh@rediffmail.com (galanayanh@rediffmail.com) bye ;).

brother am try this methode but problem not solved
i think this hardware problem u have solution this cause

FasGsm

06-09-2008, 09:23

Try this for Headset Mode.

N.I.T

06-14-2008, 08:06

Try this for Headset Mode.
whr is solution plz post again

.::skybird::.

06-14-2008, 08:37

Try this for Headset Mode.
Nothing is found there plz post again

thnx
.::skybird::.

jbbasha

06-14-2008, 19:35

Try this for Headset Mode.

pls upload it again
the attachment as soon as possible

rk19801

06-14-2008, 20:48

hello sir i have same problem ...................pls help

himanshu taldar

06-17-2008, 19:17

Try this for Headset Mode.

please specify clearly what is location it is .... sigmatel s3 hav 2x6 connecter socket...charging & headphone work in same socket....

Chandreshswami

06-23-2008, 06:36

Try this for Headset Mode.

dear bro

i cant understand how to do jumper and not understand in which part of pcb?

pls explain more....

i also attached sigmatel s2/s3 diagram

thanks

chandresh

arnav333

06-26-2008, 11:09

same error help????????????????????????????/

amit143

06-27-2008, 06:45

change 6227 it will work tested 100% ok but the whole no of the ic must be same

greatman_puneet

06-27-2008, 07:13

remove the graund capestor and sesistenses near hand free conector and cheek handset falt is ok

guru4gsm

06-28-2008, 10:23

dear bro

i cant understand how to do jumper and not understand in which part of pcb?

pls explain more....

i also attached sigmatel s2/s3 diagram

thanks

chandresh

Bro if u solved ur problem then please post her the solution I got 1 sigmatel s2 with same headset problem.........

Thanx.

Chandreshswami

07-01-2008, 15:40

Bro if u solved ur problem then please post her the solution I got 1 sigmatel s2 with same headset problem.........

Thanx.

no solution found i have replaced charging jack , formatt , flash all tested not succees

still waiting for solution

Chandreshswami

07-01-2008, 15:48

here is solution

http://www.mygsmindia.com/vbb/showthread.php?t=19971

bhatt

07-03-2008, 06:29

a1200 unlock user code with sc just press search at the same time hold green and red key

bhatt

07-03-2008, 06:35

sorry posted in wrong thred

gsm light

07-03-2008, 09:23

HOT HOT HOT
this is a big news for sigmatel s3 headset problem.
seethe picture and change the cpu
reflash the phone
phone is working perfectly.
i have done four phone with this method.
if you succ. say thanks me .
1000% perfect

deenu
from gsm light.

for jpg pl. see this link.
http://www.mygsmindia.com/vbb/showthread.php?t=19971 (http://www.mygsmindia.com/vbb/showthread.php?t=19971)

suntysunty

07-28-2008, 15:02

near hand free conector and cheek handset falt is ok

shahbs786

08-04-2008, 10:02

change cpu 6225A 1000% solve

Shahbs786@yahoo.com

RATHNAMOBILESS

08-04-2008, 10:16

thank u i try this and post result....

cgsm

08-14-2008, 11:10

change of cpu 6225a solution is working tested but little difficult
thank u,

MUSSARIN

08-23-2008, 12:58

A1200 User Memory Is Almost Full. Delet Or Move Files To Memory Card To Create Space. Ols Help Me What To Do Sir

welcome_123456

10-25-2008, 23:05

my mobile china c92 dual sim @ atime whit out sim but in sim ristart continiu phone plz help me welcome_07@rediffmail.com

nanu

10-26-2008, 08:00

try this & ifu sucess thanks to me

micro_hsr

11-14-2008, 10:09

thanksssssssssssssssssssssssssssssssss

saifali

11-16-2008, 17:16

Where is solution for headset mode problem

laxmandj9000

11-16-2008, 18:26

dear friend i am also same problem . any one help me please

jagdish puri

11-17-2008, 06:54

try this & ifu sucess thanks to me
chek nanu s post and say thanks to nanu bro . its really work thanks again to help us .:)

suntysunty

11-21-2008, 05:17

i have same problem ...................pls help

Shantobhai

11-21-2008, 05:30

Here is sigmatel s3 head set mood solution.

Bro first try to formet set if not ok than change charging conector Also not work than do this

Download here:
http://shantobhai.4umer.com/china-mobiles-all-hardware-f22/s3-head-set-mode-t104.htm

amol_sm

11-21-2008, 07:00

-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hi, i m Nayan try this on ur mobile *### then on ur screen it will show 5 option select factory mode & in it select option 13 charger & press ok. see if it works. give replay on galanayanh@rediffmail.com (galanayanh@rediffmail.com) bye ;).

This is not working dude.
It not software problem it is Hardware problem.

AnyOne solve this problem then please share here.

omkarvitekar

11-21-2008, 07:44

change mtk 6225a ( cpu ) problem is 100% sloved

tarunvishal

11-21-2008, 07:58

try this and post result

laxmandj9000

11-22-2008, 18:29

freind no one can find this problem . this problem is can't solved .k dont atake that rsk .

RATHNAMOBILESS

12-22-2008, 05:48

did not work........

saifali

12-22-2008, 09:36

change mtk 6225a ( cpu ) problem is 100% sloved
did u solve it ?
:confused::confused::confused::confused::confused: :confused:

saifali

12-22-2008, 09:38

try this and post result
but where are these ics in china boards?:eek::eek::eek::eek::eek::eek::eek::eek::ee k::eek:

saifali

12-22-2008, 09:41

Try this for Headset Mode. this is only head phone pinouts its not any solution for solve headset fault to change silent to general position:confused::confused::confused::confused:

johnsonthamil

12-22-2008, 16:53

brother i have sigmatel s3 dead set. please help me immediatly. its urgent

sanjeevnegi

12-25-2008, 13:40

if the track from the jack to cpu (bga poiny t5) is ok then change cpu 6225

sanjeevnegi

12-25-2008, 13:42

bga point t5of cpu 6225

akash_hul

12-25-2008, 13:45

this is cpu problem my brother chang mt 6225a ic

saifali

01-23-2009, 13:08

there is nothing to change headset mode from sigmatel s3

deluxshahul

03-12-2009, 10:27

thanks....................

saifali

03-14-2009, 20:00

change mtk it will work fine

sanjayvikas

08-24-2009, 09:14

i need rx tx for sigmatel s88 and s80i urgent needed plzzzzzzzzzzzzzzz

Umair Rashid

08-24-2009, 18:49

i need rx tx for sigmatel s88 and s80i urgent needed plzzzzzzzzzzzzzzz
Mostly pinouts of sigmatel phones are printed on the PCB.
What u do is just unscrew the phone and locate it.