View Full Version : Cid53 Unable To Execute Testpoint Mode
bluffmaster
04-10-2008, 09:36
Dear DBSS Team.
I Have S500i Cid53 Phone Is Working Ok and Fine.
I Need Only To Read Full Flash and Write it to Another Faulty Phone.
--- Reading Info---------------------------------------------------------------
User selected phone S500 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 3************
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Starting CS Loader GDFS Service ...
GDFS Simlocks :
Lock 0 = OFF (00) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 000-00
Done.
--- Reading Info---------------------------------------------------------------
User selected phone S500 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359085-01-506897-4
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Error : Failed.
Phone is Working Ok But Why Unable To Go Test Point Mode.
Rgds
Bluffmster
GSM Dream
04-10-2008, 12:35
Just try to do operation again. Maybe wrong testpoint.
bluffmaster
04-10-2008, 13:03
Dear Gsm Dream.
Please Check Your PM.
Rgds
Bluffmaster
i_seeque
04-22-2008, 15:40
ME too
--- Security Bypass------------------------------------------------------------
User selected phone S500 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359085-01-abcdefg-g
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Error : Failed.
-----------
DOES it mean cid53 S500 yet not supported ??
URGENT reply would be highly helpful to me.
BR
gsmxpert
04-22-2008, 16:39
wrong tp.............................
Stylo_GSM
04-23-2008, 23:02
same with me k800~?
done w580
but k800 same error
Aamir_Zia
04-23-2008, 23:17
this guy wants to say that Phone didnot going to TESTPOINT Method ...
Stylo_GSM
04-23-2008, 23:42
Basically i am unable to perform the first part (Test point), For step 1.
When the tp is connected the sw just quickly fails, I am not sure if i am doing something incorrectly but it fails too fast as if it did nothing.
IF i am doing something incorrect pls correct me, or there is a bug so i stop trying :) ?
i_seeque
04-24-2008, 06:26
Basically i am unable to perform the first part (Test point), For step 1.
When the tp is connected the sw just quickly fails, I am not sure if i am doing something incorrectly but it fails too fast as if it did nothing.
IF i am doing something incorrect pls correct me, or there is a bug so i stop trying :) ?
You are correct. It seems that there is some bug.
I select the model W580 and performed all the operation on S500 cid53.
Everything went smooth. I will post the logs asap. BR
GSM Dream
04-24-2008, 11:55
To all
Try to do all operations with latest DBSS 3.4.1
And don't forget to send logs if you'll get error.
same with my S500i CID53
it stops with error before testpoint window pops up...
here is log:
--- Security Bypass------------------------------------------------------------
User selected phone S500 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359085-01-242875-9
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 53
Error : Failed.
john423281
05-09-2008, 04:31
- added free,standalone,no testpoint, no additional expensive "tp cables"
alternative bypass method for following chipsets:
db201x cid52, db2020 cid52/cid53, pnx5230 cid52/cid53
all you need - is cheap TEST SIM CARD (or OPERATOR card)
- fixed gdfs write problem in db201x brown phones
- added support for loader inside phone
(for QUICK patch/etc operations using new alternative bypass method)
for that, run "executor" in phone (menu->games), then check in settings
"use preloader security bypass" and then do desired operation.
- misc other bugfixes, maybe some bugs, check and report.
by the_laser
http://rapidshare.com/files/113522169/v0.914029.rar.html
but i need a testcard or motorola card becouse this phone is not from my country and i dont have a simcard for it.
so i will make testpointunlock...
any ideas how to solve this problem?
i flashed it already, but dont helps-
.
thanks i_seeque
unlocked as W580 and work perfekt!
- added free,standalone,no testpoint, no additional expensive "tp cables"
alternative bypass method for following chipsets:
db201x cid52, db2020 cid52/cid53, pnx5230 cid52/cid53
all you need - is cheap TEST SIM CARD (or OPERATOR card)
- fixed gdfs write problem in db201x brown phones
- added support for loader inside phone
(for QUICK patch/etc operations using new alternative bypass method)
for that, run "executor" in phone (menu->games), then check in settings
"use preloader security bypass" and then do desired operation.
- misc other bugfixes, maybe some bugs, check and report.
by the_laser
http://rapidshare.com/files/113522169/v0.914029.rar.html
ITS DREAM SECTION MATE DON'T POST USELESS**********
gessebsb
08-23-2008, 11:18
my w580 have the problem if is red blink what the solution?
GSM Dream
08-24-2008, 20:27
my w580 have the problem if is red blink what the solution?
Hello!
1. Download fullflash file W580
2. Choose model W580 in DBSS
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Sec. Blc."
8. Go to Flash tab & flash: Main+FS+Custpac.
If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...
hackerbd
08-24-2008, 21:01
my w580 have the problem if is red blink what the solution?
If its red blinking ,
1.Select Test point access mode
2.Make test point
3.When finish test point then
4.Change access mode to security bypass
5.Press unlock repair
If gdfs reading failed :(
7.Write gdfs then press unlock repair..
gessebsb
08-26-2008, 02:36
Write GDFS-----------------------------------------------------------------
User selected phone W580 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357143-01-894298-4
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ... /
and hangs the program was over 30 minutes and have not left here
3 telephones with the same problem
Write GDFS-----------------------------------------------------------------
User selected phone W580 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357143-01-894298-4
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ... /
and hangs the program was over 30 minutes and have not left here
3 telephones with the same problem
wrong tp connect try again
doller