imie has change

[phoneteam]

after i write telma file in support my phone imie become 0004999010640000
is ther any way to repaire this?i tried reset to default but doesnt help and when entered sim it sayssim bloque

COM4 [VCP1] selected
Device: ZTE-A35
Checking data, wait...
Action: unlock
Boot...
Press and HOLD Power button now !
loading...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sta_20080412-132810.B1E.bin
loading data...
wrong database file: C:\Program Files\InfinityBox\Pana01\za35_eep65535.cfg
error: can't load database v.11
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sec_20080412-132814.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-complete_20080412-132822.B1E.bin
reading [eeprom-dyn]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-dyn_20080412-132827.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 48 sec

[InfinitySupport]

Dear Friend,

it was no any reason to write eeprom from support area in your phone.
Now you must find your phone original eeprom file and write it back.

[kasamiko]

Try writing this back to your phone..

file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sta_20080412-132810.B1E.bin

I don't know why you write eeprom?

what's the problem with your phone?

[phoneteam]

thank you very much for your help
i write that file because of counter blocked
now i am little confuse which is my original eepom file
can you please guild me how to find the eeprom file, i did two the imeie is same start with 00499......

Device: ZTE-A35
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now !
loading...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-complete_20080403-171945.B1E.bin
loading data...
wrong database file: C:\Program Files\InfinityBox\Pana01\za35_eep65535.cfg
error: can't load database v.11
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-sec_20080412-165423.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-complete_20080412-165431.B1E.bin
reading [eeprom-dyn]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_eeprom-dyn_20080412-165439.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Erasing: Eeprom
Writing: Eeprom
Write Done
Finished, Remove/Install battery now !
Time used: 48 sec

[phoneteam]

thank you very much done

[InfinitySupport]

eeprom file example:

C:\Program Files\InfinityBox\Pana01\backup_eeprom-complete_20080412-165431.B1E.bin
20080412: date 2008-04-12
165431: time = 16:54

[helperer]

you have to check may be earlier any back up in your pana01 folder

[phoneteam]

now my phone is working without sim, card but when insert sim it shows welcome logo then giong switch off,
do you know any idea for this?

[InfinitySupport]

now my phone is working without sim, card but when insert sim it shows welcome logo then giong switch off,
do you know any idea for this?

Hello,

Did you tried to make 112 (emergency) call without SIM card ?
What is the results ?