View Full Version : W810 insert correct sim after full flash !
ehsan_lzl
04-12-2008, 10:14
that was hanging on se logo , after flashing with full flash using w200 model at the interface it will turn on but shows insert correct sim !! and when i try to unlock and repair gdfs security blocks , all goes to be ok but at power on it shows a light and nothing else ...
any idea ?
ehsan_lzl
04-12-2008, 11:48
im still wait ...
help please ...
john.pallan
04-12-2008, 12:04
reflash it again with other flash file...and unlock...
ehsan_lzl
04-12-2008, 12:18
can i flash phone with other tool ?
or if i do it then i should bypass security again using test point ?
and where i can find a good full flash for w810 ?
1. Download that file W810_Full_Flash_Tested (http://rapidshare.com/files/106878006/W810_full_OTP-CID50_EROM-CID-50.bin)
2. Select W200 in model list
3. If You execute hereon phone "Security Bypass" operation dont need do that again.
4. In Access Mode select Security Bypass
5. Go to Misc tab & write full flash (see in p.1)
6. After that go to Security tab & execute "Unlock & Repair GDFS Sec. Blocks"
If after thats all operations Your phone is still dead so it is HW problem.
1. Download that file W810_Full_Flash_Tested (http://rapidshare.com/files/106878006/W810_full_OTP-CID50_EROM-CID-50.bin)
2. Select W200 in model list
3. If You execute hereon phone "Security Bypass" operation dont need do that again.
4. In Access Mode select Security Bypass
5. Go to Misc tab & write full flash (see in p.1)
6. After that go to Security tab & execute "Unlock & Repair GDFS Sec. Blocks"
If after thats all operations Your phone is still dead so it is HW problem.
Hi, Medved!
What software do I use to follow this instruction? Setool2 lite version 1.11 or other version? Or other software?
Thanks a lot, man!
Ed.
GSM Dream
03-04-2009, 14:21
Hello!
Hi, Medved!
What software do I use to follow this instruction? Setool2 lite version 1.11 or other version? Or other software?
Thanks a lot, man!
Ed.
There is DreamBox (http://dreambox.hk) support section, so all instructions for DreamBox Service Software (http://dreambox.hk/downloads.php).
peter002
03-04-2009, 16:07
was ur fone loked wen u got it????
if not then it was dafenately unlokked in patched method using the other tools, coz only in that case the fone gets again loked after the flashing... unlk ur fone and never forget to post the full fone log wen u need the hlp regarding the fone...
post the results..