PDA

View Full Version : w200 bad gdfs!!!


tiri piri
04-12-2008, 11:11
can i repair w200 with bad gdfs? i have always the same error : invalid gdfs structure!!!!

thx!

hridaya
04-12-2008, 11:22
i have the same problem
phone was destroyed by davinci - fenix client and maybe it has destroyed gdfs

--- Loading flash file---------------------------------------------------------
Loading "D:\gsm\dreambox\se\w200\fullflash\__0330-1211_full.bin"...
Done.

--- Write Flash----------------------------------------------------------------
User selected phone W200 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 2019
OTP Status = LOCKED
OTP IMEI = 354269-01-372775-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 51
Hint : Now the probe might be disconnected
Processing ...
Error : Invalid GDFS structure and/or configuration.
Hint : Try to flash firmware.
Error : Failed.

sairat
04-13-2008, 10:32
i have the same problem
phone was destroyed by davinci - fenix client and maybe it has destroyed gdfs

--- Loading flash file---------------------------------------------------------
Loading "D:\gsm\dreambox\se\w200\fullflash\__0330-1211_full.bin"...
Done.

--- Write Flash----------------------------------------------------------------
User selected phone W200 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 2019
OTP Status = LOCKED
OTP IMEI = 354269-01-372775-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 51
Hint : Now the probe might be disconnected
Processing ...
Error : Invalid GDFS structure and/or configuration.
Hint : Try to flash firmware.
Error : Failed.

i think its due to bad flash chip or tp

hridaya
04-13-2008, 17:54
i don't think so.
phone was new, and has died unlocking via davinci server....
getting gdfs structure.. i do not know what fenix client does during that operation. but it has stoped without any reason.
there were no response from that brilliant s_ucking team support and phone was dead.
it cannot be written by any tool , i mean ordinary write flash - tried with cruiser, setool, mtbox, universalbox.

hardware it is ok 100%. maybe there is another explanation why dreambox cannot write fullflash. i have tried many time stage 1 and same repsonse every time.

kevin168
04-13-2008, 23:52
try upgrading to 52 phones
try write w200 dump file via TP
try to check UPP pin carefully, maybe one of them was short with other pin
try to get some better grounding on your PC

some hint at se phones in that variant, that was awfull device, some mistake when opening, u know some electro static issue could make some broken or not fully workin chip.
rare case but sometimes happen...

br,
kevin168

luzer
04-14-2008, 03:13
Error : Invalid GDFS structure and/or configuration.

DreamBox doesn't support W200 with that problem

GSM Dream
04-14-2008, 11:33
Hello!
1. Try to reorganize GDFS (phone must be alive) - try to change your phone settings (reset settings/change theme/add-delete contacts in phone book). (if phone alive)
2. Try to flash phone in "DCU60" Access Mode
If W200 has "Invalid GDFS and/or configuration" and firmware flashing or GDFS reorganizing didn't help - nothing can be done.
We know about this problem and working on it.