cable L8A and L14B not connecting

[obioha]

i have tried several times to connect phones with pinfinder cable L8A and L14B,but no success.
please have anyone used these cables on pinfinder,i cant understan whats wrong with the cables.funny enough,the cales that are paired with these cables works fine.eg. cable L12B that connects with L18A works perfectly.
please infinity team what is wrong

[InfinitySupport]

Please, download latest PinFinder manual: http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
Please, see page 19: Automatic pinout detection: Troubleshooting
I hope you can solve at least 99% of possible problems (especially with 8, 12, 14, 15 pins cables) with this instruction.

[GSMSERVE]

if cable not working use this solution :

http://apu.mabul.org/up/apu/2008/04/13/img-085831nakxy.jpg (http://mabul.org/)

[obioha]

i have cut the wire as shown in 18A,but still it cant connect.so it is with L14B

[obioha]

EVEN MY L18A cable cannot connect to nokia n991.though it connects with other phones.
one familiar thing with these situation is that the cables cant power the phones and as well cant connect

[InfinitySupport]

manual: http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
page 13, "selftest".
What is selftest results ?

[obioha]

like i said before,the phones dont power on,but the power red indicator always show.but i noticed that cable no L14B,recently connects to sands p908,detect the tx and rx,but didnt power the phone.my major problem is the n95 with dual sim,i have pleanty of it but it never connects to pin finder.the mcu is mt6205,.
please try for me

[InfinitySupport]

Did you checked voltage and did you checked your Unibox according to PinFinder manual ?

[obioha]

please i just noticed that i have 2 L14B cable,the first connects together with L3A, while the other connects with L15A. please which is the real L14B,or do i suppose to have two L14B cables.thanks

[InfinitySupport]

please, finally download that stupid manual: http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
you will find pictures of connectors at end pages of that full of stupidity manual

Please, tell me how many times I must ask you to read that f u c k i n g manual ?
I have asked you to make so already 3 times in current tread. Please, let me know when I must stop my useless tries.

[mamin]

InfinitySupport thank you for detailed manual. I read it verry carefull and can tell one more think (here was problem like this): I haved problem to conect phones (DuBao 768, CECT F22...) with L12B. When check voltage on pinfinder RJ was 4,3V-4,4V. Open InfinityBox and short diode - now get 5V. After this pinfinder show me Rx and Tx (4 and 2), phones conect with Infinity software but give me error always when try to do something with phone. Thinking cable is problem but tryed to check something else - start pinfinder and press find button but waiting and press power button after pinfinder show me 4 and 2, pinfinder find one more Rx and Tx position (5 and 3) and with this configuration ALL was OK (flashing, format fs etc...) For me PinFinder is one great helper in my work with chinese phones. If you have problems in conection sometime, my suggestion is : try my case and maybe you can get good result.

BR
Mamin

[InfinitySupport]

@mamin
Thanks for information !
Hope PinFinder will be your helper not for Chinese models only: http://www.gsmhosting.net/vbb/showthread.php?t=526429

[obioha]

thank u infinity support,i am always very busy,but today i took my time to study the manual,opened the infinity box,short circuit the diode now all works fine

[InfinitySupport]

Hello,

Thank you !
Now I know what words should be used for very busy users.
Thank you very much for good lesson and explanation !
It's very good new experience for me.