View Full Version : K610 stage2 error
tgcommss
04-12-2008, 19:10
Phone lcd display white screen after se logo and please wait . Flash ic 5060M0Y0B0 , i tried all variant but stage2 error failed !!!
--- Security Bypass------------------------------------------------------------
User selected phone K610 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 351709-01-485226-4
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 49
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
yousaf22us
04-12-2008, 19:51
tp problem mate see exact varient and second stage tp
tgcommss
04-13-2008, 11:43
I tried stage1 TP no.2 failed , stage1 TP no.5 and no.7 pair with stage2 11,12,15,23, always failed at stage2 ! This is bad , is it flash ic dead ??
titan_wonder
04-13-2008, 17:13
I tried stage1 TP no.2 failed , stage1 TP no.5 and no.7 pair with stage2 11,12,15,23, always failed at stage2 ! This is bad , is it flash ic dead ??
try reflash again..mcu,fs.....
Phone lcd display white screen after se logo and please wait . Flash ic 5060M0Y0B0 , i tried all variant but stage2 error failed !!!
--- Security Bypass------------------------------------------------------------
User selected phone K610 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 351709-01-485226-4
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 49
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
http://forum.gsmhosting.com/vbb/showpost.php?p=3187915&postcount=4
tgcommss
04-14-2008, 04:20
I removed TP stage2 when show "working" , is it wrong ? Need to hold on till failed or done ?? Please advice , tq .
titan_wonder
04-14-2008, 07:30
I removed TP stage2 when show "working" , is it wrong ? Need to hold on till failed or done ?? Please advice , tq .
tp2 work beetween 68-70..although Showing " WORKING" if 80/90/100..its wrong TP...
tgcommss
04-14-2008, 08:22
tp2 work beetween 68-70..although Showing " WORKING" if 80/90/100..its wrong TP...
I not agree your opinion , i can done easy at stage1 . Tried use 60 sensitivity on 4 different tp at stage2 but failed , always wrong tp ???? :mad:
DreamSupporter
04-14-2008, 10:20
Try to perform Stage 2 once again. You can remove a needle, when you see a message in logs: "Hint : Now the probe might be disconnected".
There are 2 variants of TP for the flash chip 5060M0Y0B0 on K610 - pin #15 and pin #23.
tgcommss
04-14-2008, 14:34
I repeat try tp (5 - 15,23 . 7 - 15,23 ) again and again , very easy at stage1 ! But always failed at stage2 , this is real big bugs !!
kevin168
04-14-2008, 14:48
I not agree your opinion , i can done easy at stage1 . Tried use 60 sensitivity on 4 different tp at stage2 but failed , always wrong tp ???? :mad:
why u not agree with people who have more experience than u..
try it, u will understand..
use manual mode..
br,
kevin168
kevin168
04-14-2008, 14:51
I repeat try tp (5 - 15,23 . 7 - 15,23 ) again and again , very easy at stage1 ! But always failed at stage2 , this is real big bugs !!
if u see sensitivity on 58-60 that mean u have correct tp,
i have done many phones like this,
ussual in pin19...
br,
kevin168
titan_wonder
04-14-2008, 14:52
I repeat try tp (5 - 15,23 . 7 - 15,23 ) again and again , very easy at stage1 ! But always failed at stage2 , this is real big bugs !!
I mean when Indicator TP2 SHOW 58-60 that TP right..use sensitifity 70 (standart) ..if show 70,80,90,100 ...that wrong TP...dont say big BUG db..coz always working good..
thx
tgcommss
04-14-2008, 17:17
Ok , i use sensitivity 70(standard) , only get 'working" 40 on (5--15 , 7--15 ) but failed too ! So anything wrong ? Thanks for reply ......
kevin168
04-15-2008, 13:45
sir,
use manual method..
when sensitivity show 58 or 60..
press start...
br,
kevin168
tgcommss
04-16-2008, 04:03
Sorry , forgot to say that i using DBSE second edition . There's no manual method , i gave up trying and return to customer !! I try other phone ....... thanks for reply .
kevin168
04-16-2008, 11:29
hahaha..........
who says db second edition don't have manual method???
:D:D:D
br,
kevin168
titan_wonder
04-16-2008, 11:35
I'm new DB se user too...maybe 3week ago I bought DBSE..look.. the software just use tick and untick for manual or automatic mode..
br.
bule koplo..wasyu..
tgcommss
04-16-2008, 13:09
I'm new user of DBSE , thanks ur tips of tp autostart tick/untick . Is it manual mode will helpful than auto mode (tp autostart) ? Maybe i try next time ....... thank for reply !
k610 tp2 in pin 11 5060M0Y0Be not 5060M0Y0B0.........ok