6300 other pinout need help pls......

[shan969]

here the pic..... i search but no same pinout here .....help me infinity in this cect 6300L. the problem in this unit is full memory ..... have 5 pin outside in the pcb 10pin at all.. 10 gnd ...

http://rapidshare.com/files/107141819/6300l.jpg.html
http://rapidshare.com/files/107141940/cect_6300l.jpg.html



hope in your help...thanx..advance

[InfinitySupport]

here the pic..... i search but no same pinout here .....help me infinity in this cect 6300L. the problem in this unit is full memory ..... have 5 pin outside in the pcb 10pin at all.. 10 gnd ...

http://rapidshare.com/files/107141819/6300l.jpg.html
http://rapidshare.com/files/107141940/cect_6300l.jpg.html



hope in your help...thanx..advance

Hello,

I have prepared small instruction for you, hope it will help.
In case of any future problems don't hesitate to ask more questions.

There are different "Chinese" phones with the same name but absolutely different hardware exist on market.
Example: exist at least 30 "Chinese" phones with name "N95", at least 20 models "N73" etc. but all models has difference in hardware,
different bottom connectors, different pinouts and and has different firmware, so it's impossible to
give any advice about phone pinout only by phone name.
So we recommend you to include the next information in your request regarding pinout:
1. detailed description of model: brand name, model name, complete text from phone back label, any other marks that you can find on phone cover
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, you can find pinout by yourself more easy than before,
just check the next detailed description how to get pinout for your model:
1. use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
2. if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
3. if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
4. if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447
Universal solution for pinout detection: http://www.infinity-box.biz/index.php?id=pinfinder&lg=en

[shan969]

sir i try the guide you have even searching in the pinout that the infinity have package still not working ....if some one have same board like this and also still getting the pin pls check this pin i try in the side of the board i think the rx,tx is here but i cant find it.......

*#66*# Set Factory Mode CONFIRMEDis not working in the 6300 sir.. does 6300 have a manual reset....Factory mode: *#987#

http://rapidshare.com/files/107358633/6300l__1_.jpg.html (http://rapidshare.com/files/107358633/6300l__1_.jpg.html)

hope in your reply..

[shan969]

sir i try the guide you have even searching in the pinout that the infinity have package still not working ....if some one have same board like this and also still getting the pin pls check this pin i try in the side of the board i think the rx,tx is here but i cant find it.......

*#66*# Set Factory Mode CONFIRMEDis not working in the 6300 sir.. does 6300 have a manual reset....Factory mode: *#987#


hope in your reply..

[shan969]

sir i try the guide you have even searching in the pinout that the infinity have package still not working ....if some one have same board like this and also still getting the pin pls check this pin i try in the side of the board i think the rx,tx is here but i cant find it.......

*#66*# Set Factory Mode CONFIRMEDis not working in the 6300 sir.. does 6300 have a manual reset....Factory mode: *#987#


sorry for the many repost i have the internet problem in the shop.....

hope in your reply..

[shan969]

here the log and pinout i what to share to all. to make other work easy to flash...

log.

COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9DC1:0F5E
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.C9FE03D2.[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN_4AC838CA].rpl
identification#1 detection finished
device-id: C9FE03D2
identification#1 protocol ver: 04
ver. sw1: RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN
ver. sw2: R6300_03_0.5T03S1215, 35C737B5
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\6300\backup_flash[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN]_20080416-043815.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _C9FE03D2_RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300 _03_0_5T03S1215.BIN_4AC838CA_20080416-044014.B0X.bin
Finished, time used: 1643 sec
Remove/Install battery now !




this error come up when i sp lock the unit..so i did not try second time when i put sim it accept .....so no prob...

COM1 [Serial0] selected
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9DC1:0F5E
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: R6300_03_0.5T03S1215
Version: R6000_HW
detecting structure #2...
0done
44 byte(s) read
imei: 35790246811220
connection Ok
detecting structure #1...
0 2 3 4 5 7 8 9warning: wrong packet cs
10warning: wrong packet cs
12 13 14 16 17 18 19 21 22 23warning: wrong packet cs
24warning: wrong packet cs
26 27error: detection failed (22 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !



hope i can be big help to all .....

[InfinityHelp]

hello!

thank you for this test report!!
I am sure it will be useful for others

[bronce]

@shan969,
a lot of thanks for this info........

br,
bronce

[aljolas]

here the log and pinout i what to share to all. to make other work easy to flash...

log.

COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9DC1:0F5E
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.C9FE03D2.[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN_4AC838CA].rpl
identification#1 detection finished
device-id: C9FE03D2
identification#1 protocol ver: 04
ver. sw1: RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN
ver. sw2: R6300_03_0.5T03S1215, 35C737B5
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\6300\backup_flash[RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300_03_0_5T03 S1215.BIN]_20080416-043815.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _C9FE03D2_RATECH26_06A_PCB01_GPRS_MT6226_S01.R6300 _03_0_5T03S1215.BIN_4AC838CA_20080416-044014.B0X.bin
Finished, time used: 1643 sec
Remove/Install battery now !




this error come up when i sp lock the unit..so i did not try second time when i put sim it accept .....so no prob...

COM1 [Serial0] selected
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:9DC1:0F5E
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: R6300_03_0.5T03S1215
Version: R6000_HW
detecting structure #2...
0done
44 byte(s) read
imei: 35790246811220
connection Ok
detecting structure #1...
0 2 3 4 5 7 8 9warning: wrong packet cs
10warning: wrong packet cs
12 13 14 16 17 18 19 21 22 23warning: wrong packet cs
24warning: wrong packet cs
26 27error: detection failed (22 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !



hope i can be big help to all .....


sir can you send me the flash files that you used on this thread,,

i need it very badly......




this is my YM: al_catapang@yahoo.com

[InfinityHelp]

hello mr. aljolas!

we have this firmware on our support site

[aljolas]

ok i'll try ko look at it again....

thanks for the info....

[tenderjuicyboy]

hello... can you share another pinout for 6300L... i broke the rx/tx pinout.... so please i need another solution and pinout sir......