View Full Version : camera module not ready
alssalafiy
04-13-2008, 23:03
please help for this problem
camera module not ready
InfinitySupport
04-13-2008, 23:18
Hello,
Charge battery completely and try to use camera again.
What is the results ?
alssalafiy
04-13-2008, 23:23
Hello,
Charge battery completely and try to use camera again.
What is the results ?
same problem sir the phone is nokia n95-8g
thankx
InfinitySupport
04-13-2008, 23:36
What is current battery voltage value ?
InfinityHelp
04-13-2008, 23:36
hello!
ussually chinese phones report "camera module not ready" when they have not enough power to source mobile.
please check this
InfinitySupport
04-13-2008, 23:59
same problem sir the phone is nokia n95-8g
thankx
22:18: my advice regarding battery
22:23: (5 minutes later) user already made a lot: he have read my advice, charged battery completely, tested phone and wrote test report.
Here is a very good example of very good user's understanding and good cooperation of support persons and users !
Let's follow this fast (5 minutes only for read/work/test/reply) example in real time and for sure it will be no any problems with phone repair !
p.s.
question regarding actual battery voltage without answer already more that 20 minutes, it looks like battery voltage measurement is quite hard procedure (in compare with other procedures) and need a lot of time.
cellbhai
04-14-2008, 03:32
Dear supporter 5 minutes dont need 2 minutes enough to check with fully charged or external good stable voltage like DC POWER SUPPLY UNIT.Our doubt is with good charged battery also hand set camera not working.Any great solution?
alssalafiy
04-14-2008, 10:01
22:18: my advice regarding battery
22:23: (5 minutes later) user already made a lot: he have read my advice, charged battery completely, tested phone and wrote test report.
Here is a very good example of very good user's understanding and good cooperation of support persons and users !
Let's follow this fast (5 minutes only for read/work/test/reply) example in real time and for sure it will be no any problems with phone repair !
p.s.
question regarding actual battery voltage without answer already more that 20 minutes, it looks like battery voltage measurement is quite hard procedure (in compare with other procedures) and need a lot of time.
hi
yes brother 5 minutes becaus i have otthe battery full charged
i try whit it but same problem
and thankx fr your help i se thnat infinity team is always he beste :)
Chandreshswami
04-14-2008, 10:10
please help for this problem
camera module not ready
try after reasamble camera module sometimes it happen due to open connection bet'n pcb and camera
unlock & flash
04-14-2008, 10:14
oh man its a hardware problem .clean up your camera if not solved then changed it
InfinitySupport
04-14-2008, 17:05
hi
yes brother 5 minutes becaus i have otthe battery full charged
i try whit it but same problem
and thankx fr your help i se thnat infinity team is always he beste :)
Thank you for ignorance of my question about real battery voltage value !
alssalafiy
04-15-2008, 10:04
Thank you for ignorance of my question about real battery voltage value !
thank you brother all is ok problem is hardwar
and sorry
makkah mobile
04-15-2008, 10:19
mostly hardware camera problem when camera not correctly connect with board
.::Indian::.
05-31-2008, 10:26
Try this........
Dial *### Go to Factory Settings
now click on select type sensor at last
choose gekewei and press ok. confirm it ( press ok twice )
now youn are ready to use camera
Chandreshswami
05-31-2008, 14:24
Try this........
Dial *### Go to Factory Settings
now click on select type sensor at last
choose gekewei and press ok. confirm it ( press ok twice )
now youn are ready to use camera
bro
this is only for few sigmatel models only not working in all phone
pls help china sigmatel camera module not ready
InfinityHelp
06-06-2008, 16:25
hello!
in most cases this is hardware fault.
check connection between camer module and phone PCB.
also make sure that battery is charged enough
accurate
06-06-2008, 17:27
pls help china sigmatel camera module not ready
dear asfak type *### disply show factory mode go to 5.select type sensor then select Gekewei then press ok now camera is ready to use
bpcentergtk1
06-06-2008, 18:24
i too had a same problem when i flash the phone with other version the phone was n95 what i did was agian searched in the support and downladed the similar file and again writed in that phone and the phone worked fine that phone had the restart problem with sim now after writing the new file everything is working fine