View Full Version : Orignal copy china nokia 5310 pinout urgent
Nokia 5310 for format need its pinout. its orignal copy of 5310.
inner battery same written RM303 but behind battery show points but not written rx tx. we r opend the phone , chk in , no tx rx find in it.
PLease need urgent
InfinityHelp
04-14-2008, 12:46
hello!
and does it have some connector? what type|?
1*5 pin connecter smallest. different from oridanary connector
InfinitySupport
04-15-2008, 09:35
1*5 pin connecter smallest. different from oridanary connector
What do you mean "different" ?
What do you mean "different" ?
its connector same other models but its inner connector pin layer is smalest and then layer other connector 2*5.
uergent help
InfinityHelp
04-15-2008, 11:28
helllo!
i think this is a new type nokia charging port.
In this case worth to start searching for test points on PCB.
i dont think you will find data lines in that port
GsmFreeShop
04-15-2008, 11:34
try with this pinout i found it with pinfinder :D
5310
CPU: MT6225
result: Rx:4 Tx:3
br
>>> GsmFreeShop <<<
Nokia 5310 for format need its pinout. its orignal copy of 5310.
Hm, what is "original copy" ?
sorry for offtopic
InfinityHelp
04-15-2008, 18:50
I think he mean copy of original Nokia 5310 XpressMusic
Kamijeeawan
04-23-2008, 13:51
I have also dead china Nokia 5310 XpressMusic and its charging jack and cable same original 5310. how to find its pinouts.
thanks in advance
InfinityHelp
04-23-2008, 19:45
hello!
i think this is a new type nokia charging port.
In this case worth to start searching for test points on PCB.
fretburner
05-08-2008, 02:34
There is rx and tx writen in the back of the phone under the battery.Not rx only something like xxrx and xxtx.please check
'hope this could help you.
http://img404.imageshack.us/img404/8577/23671994336c4f9337e3an4.jpg
InfinityHelp
05-08-2008, 11:15
hello mr. MARK26!
thank you for sharing this clear pinout pictiure!!
it will be added to our pinout collection
Kamijeeawan
05-08-2008, 13:56
Hello Infinity...
I dont found rx tx on backside and in the pcb of this china 5310. I attach the pictures of backside and connector of mobile. In the backside its show 5 pins but i dont know how to find rx tx.. plz help me soon.. thanks in advance
InfinityHelp
05-08-2008, 21:22
hello!
you can find pinout very easy:
power phone from power source (with crocodiles attached to battery terminals)
and then measure voltage on all test points.
Points with voltage between 2,7 and 2,9 volts will be data lines
Kamijeeawan
05-10-2008, 15:31
thank u very much Infinity i found rx tx from this phone.. Now phone is alive. thanks once again. I attached the picture of rx and tx
Kamijeeawan
InfinityHelp
05-11-2008, 22:40
hello!
thank you for sharing this info with us
thank u very much Infinity i found rx tx from this phone.. Now phone is alive. thanks once again. I attached the picture of rx and tx
Kamijeeawan
100% working !!!
thx
connector_2x6_mini, keyboard top
__________________
| 1 2 3 4 5 6 |
| 7 8 9 10 11 12 |
---------------------------------
5310 china
4 RX
5
6
7 GND
8
9 TX
br,
alcatraz
:D
sunamuni_1985
05-21-2008, 15:27
thank u very much Infinity i found rx tx from this phone.. Now phone is alive. thanks once again. I attached the picture of rx and tx
Kamijeeawan
picture ok but change rx, tx.. now ok...100%
how can i will find china mobile Rx Tx with Multi Metter. plz help
InfinitySupport
05-22-2008, 11:35
how can i will find china mobile Rx Tx with Multi Metter. plz help
Dearest Friend,
Please, read here: http://www.gsmhosting.com/vbb/showthread.php?t=476373
dearest friend,
please, read here: http://forum.gsmhosting.com/vbb/showthread.php?t=476373
deer how can i fin pinout witout pinfinder ?
InfinityHelp
03-25-2009, 22:53
hello!
1. set multimeter to voltage measuring.
2. check bettery voltage, it should be more than 3,7volts
3. set one multimeter probe to some grounded phone part
(if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal)
4. with second probe touch one by one all phone pins (phone battery attached)
(to get better result i would advice to set needle on the end of second probe)
memorise pins with voltage between 2,7-2,9volts.
those are tx/rx
Made In China
04-06-2009, 01:01
check under serial sticker ... tested