N88 Restarting after Format same problem..

[ASHRIFF]

Hello, N88 after format same problem... any solution please...

file:///C:/DOCUME%7E1/MJ/LOCALS%7E1/Temp/moz-screenshot.jpgfile:///C:/DOCUME%7E1/MJ/LOCALS%7E1/Temp/moz-screenshot-1.jpg
http://i240.photobucket.com/albums/ff102/ASHRIFF_2007/Picture003.jpg

http://i240.photobucket.com/albums/ff102/ASHRIFF_2007/Picture002.jpg

http://i240.photobucket.com/albums/ff102/ASHRIFF_2007/untitled.jpg

[InfinitySupport]

Did you tried to make 112 (emergency) call without SIM card ?

[ASHRIFF]

I can't able to call 112 because even no sim inserted the phone shut off in few second and restarting and restarting...

[InfinityHelp]

hello!

make read detailed information and find suitable flash file
http://forum.gsmhosting.com/vbb/showthread.php?t=499453

[ASHRIFF]

I try those step but i'm failed to get version of its SW...


COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #02 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #03 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
Warning: probably flash chip empty, erased, incorrectly flashed or damaged.

What to do:
1. go to software "Settings" page
2. set "Advanced chip detection method" box UN-CHECKED !
3. make flash write operation

If still no luck: send mail to support (mt62xx@gmail.com) with detailed description of problem,
attach the next files in your e-mail:
1. C:\Program Files\InfinityBox\ChineseMiracle\operation.log
2. C:\Program Files\InfinityBox\ChineseMiracle\cfi_***x_***x.bin
detecting chip #01 in region #00...
flash: 01227E22022201:FFFFFF00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
it's time to stop: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00700000
flash: 01227E22022201:FFFFFF00000000
checking area[00000000]: 00000000-007FFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00700000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
operation terminated by user
error: critical error#1 during ffs size detection
error: can't detect eeprom/ffs address/size
error: chip layout not detected
error: chip layout not detected
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Finished, time used: 59 sec
Remove/Install battery now !


advise please

[InfinitySupport]

You have found 2nd CPU pinout, you must find 1st CPU pinout and format 1st CPU instead of 2nd

[SKYPHONE]

try this.
this is for first cpu.;);)

[AKKA]

I have same without sim restarting problem with one 2x6 conector N88 tryed with pinfinder but cant find any pinout for this phone.Any help?????
WBR

[InfinityHelp]

hello!

if you know how to use pinfinder and have found pinouts with it before-
then only one reason can be- pinout is not presented in system connector.
i would advice to search for pinout in available test points.
you can find them by measuring voltage on them
pins with voltage 2,7-2,9 volts will be data lines