View Full Version : lg m6100 flash problem
lacasapc
04-26-2008, 01:50
hi, i have an lg m6100 to flash, it doesnt power on after a bad flash,
"usb devise not recognised"
is there any way to conect it in emergency mode?, or another solution please,
and tell me what module to use with furious to do the flash please
.:hack3r2k:.
04-26-2008, 09:55
hi, i have an lg m6100 to flash, it doesnt power on after a bad flash,
"usb devise not recognised"
is there any way to conect it in emergency mode?, or another solution please,
and tell me what module to use with furious to do the flash please
Lol man. You must use LGM2 module to flash that phone and KG800 rj45 cable not usb.
Br;)
lacasapc
04-26-2008, 21:54
Lol man. You must use LGM2 module to flash that phone and KG800 rj45 cable not usb.
Br;)
thanks bro,
excuse me, but i think you are wrong about the cable, this cellphone doesnt allow kg800 cable, it is lg7500 cable instead.
lacasapc
04-27-2008, 00:23
Lol man. You must use LGM2 module to flash that phone and KG800 rj45 cable not usb.
Br;)
i conected with lg7500 cable, rj45,
but it sends an error is this one
Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !
Flash ID: 0089:0816 0101
Unknown flash id ! Contact support !
Error ... !
Time needed - 00:00:03
what can i do?
.:hack3r2k:.
04-27-2008, 16:21
i conected with lg7500 cable, rj45,
but it sends an error is this one
Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !
Flash ID: 0089:0816 0101
Unknown flash id ! Contact support !
Error ... !
Time needed - 00:00:03
what can i do?
Heh yes my mystake for cable. Select F3000 instead.
Br;)
lacasapc
04-28-2008, 23:37
Heh yes my mystake for cable. Select F3000 instead.
Br;)
i just have lg7500
wich one is this cable?
ok the cable is the same (lg7050) it can be used for M6100 and too many other LG2G with 24pin connector.
try to sellect F3000 instead of M6100 if not help then you have new hardware and you must use LG Multidownloader for flashing the phone.
WBR
lacasapc
04-29-2008, 22:14
ok the cable is the same (lg7050) it can be used for M6100 and too many other LG2G with 24pin connector.
try to sellect F3000 instead of M6100 if not help then you have new hardware and you must use LG Multidownloader for flashing the phone.
WBR
thank you,
it seems its the new hardware, here is the log
Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !
Flash ID: 0089:0816 0101
Unknown flash id ! Contact support !
Error ... !
Time needed - 00:00:03
where can i get lg multiloader?
.:hack3r2k:.
04-30-2008, 15:39
thank you,
it seems its the new hardware, here is the log
Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !
Flash ID: 0089:0816 0101
Unknown flash id ! Contact support !
Error ... !
Time needed - 00:00:03
where can i get lg multiloader?
Is impossible get such error if you use latest version and one model like F3000, S5100 and upper selected.
Br;)
lacasapc
04-30-2008, 18:40
Is impossible get such error if you use latest version and one model like F3000, S5100 and upper selected.
Br;)
ok, i will check and post reply
lacasapc
04-30-2008, 19:51
ok, i will check and post reply
i flashed the phone with m6100 model selected, with s5100, with s5200, and with all other in the list,
and i have m2 module LGM2_BETA_v1.0.0.1775
i dont know what else to do, help me please
.:hack3r2k:.
04-30-2008, 21:04
i flashed the phone with m6100 model selected, with s5100, with s5200, and with all other in the list,
and i have m2 module LGM2_BETA_v1.0.0.1775
i dont know what else to do, help me please
Please use from BETA LGM2_BETA_v1.0.0.1780 !!!
Br;)
lacasapc
04-30-2008, 22:21
Please use from BETA LGM2_BETA_v1.0.0.1780 !!!
Br;)
no way bro,
downloaded last version lgm2_beta_v1.0.0.1780
and tried with m6100 module, mg285, kg810 module, f3000 module and always says
Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !
Flash ID(0): 0089:0816:0101
Unknown flash id ! Contact support !
Error ... !
Time needed - 00:00:03
any other sugestion please?
or may i use lg multidownloader, anyone has it?
josh_aina
07-05-2008, 17:59
I need pinout for LG S5200
Thanks