sagem my150x in unlock process dead

[m s s spk]

ihave 2 phones of sagem my150x one is unlocked ok but the other one is dead before write done its show error what can we do infinity i have searched a lot but could not find the way

[InfinitySupport]

I can't give any advice because I can't understand what "show error" you talk about.
Is it was really error ?

[m s s spk]

sir phone give the error write epprom

[sarbi]

u mean phone become dead during unloking, if have log plz post here.

[InfinitySupport]

sir phone give the error write epprom

There is no such text in log window during unlock process

[m s s spk]

sir what can we do we try to unlock that model if phone goes off i want to know that infinity had any solution because we r in trouble we need solution .before that model i have done it vodafone 226&sagem my 150x ok in this case i m in trouble the method was same but what wrongs it can'nt understand to me

[InfinitySupport]

sir what can we do we try to unlock that model if phone goes off i want to know that infinity had any solution because we r in trouble we need solution .before that model i have done it vodafone 226&sagem my 150x ok in this case i m in trouble the method was same but what wrongs it can'nt understand to me

You must explain what is the problem during unlock, nothing else.

[m s s spk]

sir it show the eeprom error then show me to write done enter code after error it show me to ok

[InfinitySupport]

sir it show the eeprom error then show me to write done enter code after error it show me to ok

You have "operation.log" file in folder with software module, all steps saved there.

[m s s spk]

COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
sw version: EAI_IC_030807_1302 030807_1302 EAI_IC Ag Bh `
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sta_20080428-162921.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sec_20080428-162927.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-complete_20080428-162934.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
repair write error [002F6800]...
Ok
repair write error [002F7000]...
Ok
Write Done
Finished, Remove/Install battery now !
Time used: 85 sec
sir first of thanks here is the logs that phone who dead

[m s s spk]

sir this another sagem my150x who unlocked ok thourgh infinity same procedure we apply here is the logs phone ok
COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
sw version: EAI_IC_300707_1408 300707_1408 EAI_IC Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sta_20080429-123622.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sec_20080429-123626.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-complete_20080429-123633.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 69 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

[InfinitySupport]

Hello,

As I can see write error was recovered. Are you sure that phone was completely Ok before unlock ?

Also, read flash from this phone and send to InfinityBoxSupport@gmail.com (attach problem description in your mail)

[m s s spk]

when i try to read eeprom its show me that error
COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: read flash
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
error: can't run preloader:
middle part...
error: can't run middle loader:
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Failed
Finished, Remove/Install battery now !
Time used: 23 sec
ihave eeprom back up can i mail u

[m s s spk]

sorry read flash above

[InfinitySupport]

when i try to read eeprom its show me that error
COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: read flash
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
error: can't run preloader:
middle part...
error: can't run middle loader:
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Failed
Finished, Remove/Install battery now !
Time used: 23 sec
ihave eeprom back up can i mail u

If so, you must repair phone hardware or charge phone battery.
Error that I have seen in unlock log can't be a reason why phone can't boot.

I suggest you to reball flash chip IC.

[m s s spk]

iwant to inform u that i have read his flash and send to you in your mail address plz chek it

[hallime2001]

pl wene infinty team suported my 220 sagem to be flashed

[m s s spk]

i have send u aread flash his 150x but u send me the language pack of this file who already download from support but its not work if my sagem my150x is possible thourgh infinity or not

[InfinitySupport]

i have send u aread flash his 150x but u send me the language pack of this file who already download from support but its not work if my sagem my150x is possible thourgh infinity or not

Nice...
Did you read my mail carefully ?

I have no any advices for you, you can ignore all my advices or repair phone - as you wish.
bye

[m s s spk]

sir iave flash my150x thourgh your file but its show me that error here is logs
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.45
S/N: 01A8:010E
Wait...
Current model: Sagem-my150x
Ready
Loading file v.02...
Sagem-my150x_main_lp_EAI_IC_030807_1302_Aug-3-2007.B1E.bin loaded
COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
sw version: EAI_IC_030807_1302 030807_1302 EAI_IC Ag Bh `
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sta_20080502-145658.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sec_20080502-145703.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-complete_20080502-145710.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Erasing: Eeprom
Writing: Eeprom
repair write error [00216800]...
error: write failed[00200000]
Write Failed
Finished, Remove/Install battery now !
Time used: 54 sec

[m s s spk]

sir reply to me what can we do we r still waiting for your reply now told me what is the problem in it

[InfinitySupport]

Hello,

According to your log file I think that your phone has damaged hardware (probably flash chip is damaged), probably water inside or something else.

[m s s spk]

Hello,

According to your log file I think that your phone has damaged hardware (probably flash chip is damaged), probably water inside or something else.
hi sir i check his hard ware there is no problem in this after flash your file who send to me phone not connected now i m still waiting for the update

[vrepair]

try unlocking with MT-BOX RED.. may be it solves ur problem

[m s s spk]

try unlocking with MT-BOX RED.. may be it solves ur problem
bro i dont have mt red i want ask infinty when he will update his flashing &firmware

[InfinitySupport]

bro i dont have mt red i want ask infinty when he will update his flashing &firmware

Did you tried to flash your phone again with file that you have got from me ?
What is the results ?

[elcapitel]

sir iave flash my150x thourgh your file but its show me that error here is logs
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.45
S/N: 01A8:010E
Wait...
Current model: Sagem-my150x
Ready
Loading file v.02...
Sagem-my150x_main_lp_EAI_IC_030807_1302_Aug-3-2007.B1E.bin loaded
COM1 [Serial0] selected
Device: Sagem-my150x
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
sw version: EAI_IC_030807_1302 030807_1302 EAI_IC Ag Bh `
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sta_20080502-145658.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sec_20080502-145703.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-complete_20080502-145710.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Erasing: Eeprom
Writing: Eeprom
repair write error [00216800]...
error: write failed[00200000]
Write Failed
Finished, Remove/Install battery now !
Time used: 54 sec


Please, no public you S/N.


For you solution test reflash with flash from support and Pana01 v1.44 and post result.

BR
elcapitel

[mobile_hotman]

Hello,

As I can see write error was recovered. Are you sure that phone was completely Ok before unlock ?

Also, read flash from this phone and send to InfinityBoxSupport@gmail.com (attach problem description in your mail)


COM4 [Serial2] selected
Device: Sagem-my150x
Checking data, wait...
Action: unlock
restore
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
sw version: EAI_IC_300707_1408 300707_1408 EAI_IC Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my150x_eeprom-sta_20080815-164310.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my150x_eeprom-sec_20080815-164333.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my150x_eeprom-complete_20080815-164343.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: #2, already unlocked
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 167 sec

But After Unlock on fone SCREEN it is written Telfn kilitlendi ?????