PDA

View Full Version : panasonic vs3 flash prob

habibkhalil
04-28-2008, 16:23
vs3 light on then quickly off
i flash it with infinity box the prob in writing firmware it fails i change with another version same prob

so in the end of flash same prob

any help
COM6 [VCP9] selected
Device: Panasonic VS2,VS3
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
boot answer: 03
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0089:880D
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Panasonic VS2,VS3_eeprom-sta_20080428-155541.2CE.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Panasonic VS2,VS3_eeprom-sec_20080428-155545.2CE.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Panasonic VS2,VS3_eeprom-complete_20080428-155556.2CE.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Writing: Firmware
Verifying...
Verify result: 0000
warning: probably zone write failed
Writing: FFS-1/Customization
Verifying...
Done
Writing: Language Pack
Verifying...
Done
Writing: Graphics Pack
Verifying...
Done
Writing: FFS-2/File system
Verifying...
Done
Writing: FFS-2/File system
Verifying...
Done
Write Done
Finished, Remove/Install battery now !
Time used: 1298 sec
InfinitySupport
04-28-2008, 16:32
I don't see any problems with flashing.
Open phone and check it's hardware.
habibkhalil
04-28-2008, 16:38
I don't see any problems with flashing.
Open phone and check it's hardware.

what does it mean


Writing: Firmware
Verifying...
Verify result: 0000
warning: probably zone write failed

thanks
InfinitySupport
04-28-2008, 18:19
This means nothing.
At least nothing serious that may be related with power-on problem.

I suggest you to check phone hardware. Also you can try to write another firmware but check hardware first !!
habibkhalil
04-29-2008, 11:58
This means nothing.
At least nothing serious that may be related with power-on problem.

I suggest you to check phone hardware. Also you can try to write another firmware but check hardware first !!

prob solved with firmware version vf10

all ok
thanks