Chandreshswami
04-29-2008, 13:18
I have recieved ZT580 in dead condition when try to format ffs with infinity cant activate test mode here is log
COM12 [VCP4] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 104 sec
Remove/Install battery now !
So i have formatted complete But phone cant power on here is log
COM12 [VCP4] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 66A5D1E5
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-130409.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-130432.B0X.bin
Finished, time used: 164 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
Phone not power on with this procedure
THEN I HAVE READ EPPROM AND FIRMWARE FROM SAME WORKING PHONE SAME VERSION
HERE IS LOG OF INFO...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 57600
error: connection failed !
Operation failed !
Finished, time used: 5 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: TOPWISE25_07A_HW
Software version: MAUI.07A.W07.32.MP.V
Software date: 2006.06.14
Barcode: 05220103285 10
imei: 355402100034980
Finished, time used: 5 sec
Power off phone now !
LOG : READ FLASH
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:B503:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.326F78F1.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 326F78F1
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _326F78F1_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-141846.B0X.bin
Finished, time used: 769 sec
Remove/Install battery now !
LOG : READ EPPROM
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read eeprom
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:B503:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.326F78F1.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 326F78F1
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _326F78F1_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-142058.B0X.bin
Finished, time used: 123 sec
Remove/Install battery now !
THEN I FLASH WITH TWO FILES
Loading file v.02...
backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
You have loaded file with security features enabled.
detecting languages...
Languages: En Cn Ar
Loading file v.02...
backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin loaded
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
Warning: probably flash chip empty, erased, incorrectly flashed or damaged.
What to do:
1. go to software "Settings" page
2. set "Advanced chip detection method" box UN-CHECKED !
3. make flash write operation
If still no luck: send mail to support (mt62xx@gmail.com (mt62xx@gmail.com)) with detailed description of problem,
attach the next files in your e-mail:
1. C:\Program Files\InfinityBox\ChineseMiracle\operation.log
2. C:\Program Files\InfinityBox\ChineseMiracle\cfi_***x_***x.bin
detecting chip #01 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:FFFFFF00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom_200 80429-142540.B0E.bin
flash: EC257E25082501:FFFFFF00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5._TOPW ISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_32_MP _V7_M540.BIN_8F9F67A3_.rpl
security area#1 backup loaded
security area#1 calculation...
done
Area: Firmware
flash: EC257E25082501:FFFFFF00000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 288 sec
Remove/Install battery now !
REWRITE
Loading file v.02...
backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
You have loaded file with security features enabled.
detecting languages...
Languages: En Cn Ar
Loading file v.02...
backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin loaded
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 66A5D1E5
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-144152.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5._TOPW ISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_32_MP _V7_M540.BIN_8F9F67A3_.rpl
security area#1 backup loaded
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-144209.B0X.bin
Area: Firmware
flash: EC257E25082501:18E59F00000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-144239.B0X.bin
Finished, time used: 159 sec
Remove/Install battery now !
PHONE STILL DEAD WHAT TO DO? NEED YOUR OPINION
i have also attached link of epprom and firmware of same working phone here
http://rapidshare.com/files/111244694/backup_flash_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.M AUI_07A_W07_32_MP_V7_M540.BIN__20080429-141717.B0M
http://rapidshare.com/files/111244781/backup_eeprom_TOPWISE25_07A_PCB01_GPRS_MT6225_S00. MAUI_07A_W07_32_MP_V7_M540.BIN__20080429-142055.B0
COM12 [VCP4] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 104 sec
Remove/Install battery now !
So i have formatted complete But phone cant power on here is log
COM12 [VCP4] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 66A5D1E5
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-130409.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-130432.B0X.bin
Finished, time used: 164 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
Phone not power on with this procedure
THEN I HAVE READ EPPROM AND FIRMWARE FROM SAME WORKING PHONE SAME VERSION
HERE IS LOG OF INFO...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 57600
error: connection failed !
Operation failed !
Finished, time used: 5 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: TOPWISE25_07A_HW
Software version: MAUI.07A.W07.32.MP.V
Software date: 2006.06.14
Barcode: 05220103285 10
imei: 355402100034980
Finished, time used: 5 sec
Power off phone now !
LOG : READ FLASH
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:B503:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.326F78F1.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 326F78F1
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _326F78F1_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-141846.B0X.bin
Finished, time used: 769 sec
Remove/Install battery now !
LOG : READ EPPROM
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read eeprom
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:B503:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.326F78F1.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com (mt62xx@gmail.com)
- send flash backup file(s) to support: mt62xx@gmail.com (mt62xx@gmail.com)
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 326F78F1
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _326F78F1_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-142058.B0X.bin
Finished, time used: 123 sec
Remove/Install battery now !
THEN I FLASH WITH TWO FILES
Loading file v.02...
backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
You have loaded file with security features enabled.
detecting languages...
Languages: En Cn Ar
Loading file v.02...
backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin loaded
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
Warning: probably flash chip empty, erased, incorrectly flashed or damaged.
What to do:
1. go to software "Settings" page
2. set "Advanced chip detection method" box UN-CHECKED !
3. make flash write operation
If still no luck: send mail to support (mt62xx@gmail.com (mt62xx@gmail.com)) with detailed description of problem,
attach the next files in your e-mail:
1. C:\Program Files\InfinityBox\ChineseMiracle\operation.log
2. C:\Program Files\InfinityBox\ChineseMiracle\cfi_***x_***x.bin
detecting chip #01 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:FFFFFF00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?
If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom_200 80429-142540.B0E.bin
flash: EC257E25082501:FFFFFF00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5._TOPW ISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_32_MP _V7_M540.BIN_8F9F67A3_.rpl
security area#1 backup loaded
security area#1 calculation...
done
Area: Firmware
flash: EC257E25082501:FFFFFF00000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 288 sec
Remove/Install battery now !
REWRITE
Loading file v.02...
backup_flash[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-141717.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
You have loaded file with security features enabled.
detecting languages...
Languages: En Cn Ar
Loading file v.02...
backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-142055.B0E.bin loaded
COM12 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:6E03:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
New firmware detected:
TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 66A5D1E5
identification#1 protocol ver: 04
ver. sw1: TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN
ver. sw2: MAUI.07A.W07.32.MP.V7_M540, 5C986070
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN]_20080429-144152.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5.[TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_3 2_MP_V7_M540.BIN_8F9F67A3].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.66A5D1E5._TOPW ISE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_32_MP _V7_M540.BIN_8F9F67A3_.rpl
security area#1 backup loaded
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-144209.B0X.bin
Area: Firmware
flash: EC257E25082501:18E59F00000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _66A5D1E5_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.MAUI _07A_W07_32_MP_V7_M540.BIN_8F9F67A3_20080429-144239.B0X.bin
Finished, time used: 159 sec
Remove/Install battery now !
PHONE STILL DEAD WHAT TO DO? NEED YOUR OPINION
i have also attached link of epprom and firmware of same working phone here
http://rapidshare.com/files/111244694/backup_flash_TOPWISE25_07A_PCB01_GPRS_MT6225_S00.M AUI_07A_W07_32_MP_V7_M540.BIN__20080429-141717.B0M
http://rapidshare.com/files/111244781/backup_eeprom_TOPWISE25_07A_PCB01_GPRS_MT6225_S00. MAUI_07A_W07_32_MP_V7_M540.BIN__20080429-142055.B0