PDA

View Full Version : Nokia 5310 Display "Bad Sofware" please help

Star75
04-29-2008, 15:08
Nokia 5310 Display "Bad Sofware" after Format with spiderman .:confused:

infinity please help :


Nokia 5310:
CPU : MT6225
Flash :SAMSUNG K5L2731CAM
Soft :
SINGLE25_06B_PCB01_GPRS_MT6225_S00.A90V1_6_1.BIN

I do it with Infinity Box but the same:(
-Format
-Ease whole flash chip and write flash and e2p (read full from a other good phone working) but the same phone display "bad software" when press power on

here the log
COM8 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:5303:0008
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:FFFFFF00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Area: Firmware
flash: EC257E25082501:FFFFFF00000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:18E59F00000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 521 sec
Remove/Install battery now !


any idea ?? solve this proplem:confused:
InfinityHelp
04-29-2008, 18:24
hello!

is this double MCU phone? maybe worth to format both phone parts and then try to power On
Star75
04-29-2008, 18:38
hello!

is this double MCU phone? maybe worth to format both phone parts and then try to power On

No, it's only one CPU MT6225A


How to solve this problem ?
dog_baby
04-30-2008, 06:49
same me, pls try with other tool, Infi not fix this Problem(Test by me on this phone) at this time.
good luck!
amol_sm
04-30-2008, 08:05
hello!

is this double MCU phone? maybe worth to format both phone parts and then try to power On

Double MCU phone mean . . . . . ? :confused:
I don't understand InfinityHelp. PLEASE explain more detail.



Thankx in advance.
Star75
04-30-2008, 08:17
some picture of the phone
InfinityHelp
04-30-2008, 09:31
hello!

some chinese phones have 2 MCU
each one control own sim card.
if your phone is double MCU- i can advice to make complete format for both parts in a row
and only after that power On phone
dog_baby
05-02-2008, 06:47
can you help us in this case?
other tool not fix this Prob(Ex: VE Pro, Tian box,MTK2, UP1024......:-))
i have FB(Flash + Eeprom) of phone
thanks....
maplegsm
05-02-2008, 08:23
read full flash with same phone than write
ahmertelecom
05-02-2008, 08:52
read full flash with same phone than write

i try
after this phone dead

erase whole flash chip then write phone on but same bad software
ahmertelecom
05-02-2008, 08:54
i try
after this phone dead

erase whole flash chip then write phone on but same bad software

hello!

some chinese phones have 2 MCU
each one control own sim card.
if your phone is double MCU- i can advice to make complete format for both parts in a row
and only after that power On phone

I DONT UNDERSTAND HOW HOW CAN FORMAT BOTH PARTS
maplegsm
05-02-2008, 10:12
please infinty tell me second cpu points
ahmertelecom
05-02-2008, 12:40
he say 2 mcu not says 2 cpu
InfinityHelp
05-02-2008, 15:57
hello guys!

MCU is same as CPU.
my saying "format both phone parts" i mean format first MCU memory
and without powering On mobile
connect cable to second MCU pinout and format second phone part
adnanali
06-26-2008, 05:22
Dear all, here is readed files for bad soft and tested 100% work for this model of chines 5310 X225B_PCB01_GPRS_MT6225_S00.BIN ok read 5310 for bad soft remember all chines 5310 have different files plz post results also in rar logs for help what you have and what you write?
link is here http://www.4shared.com/file/52753659/49f3bd4d/X225B_PCB01_GPRS_MT6225_S00BIN_____ok_read_5310_fo r_bad_soft.html
adnanali
06-26-2008, 05:27
Dear all, here is readed files for bad soft and tested 100% work for this model of chines 5310 X225B_PCB01_GPRS_MT6225_S00.BIN ok read 5310 for bad soft remember all chines 5310 have different files plz post results also in rar logs for help what you have and what you write?
link is here http://www.4shared.com/file/52753659/49f3bd4d/X225B_PCB01_GPRS_MT6225_S00BIN_____ok_read_5310_fo r_bad_soft.html

Note also you use this for another one 100% tested and credit goes to infinity
chines 5310 bad software 100% tested solution
1st format WHOLE FLASH CHIP of your mobile then write bin file eeprom: eeprom[SINGLE25_06B_PCB01_GPRS_MT6225_S00.A90V1_6_1.BIN]_20080602-201501.B0E.bin.

main From Support: SINGLE25_06B_PCB01_GPRS_MT6225_S00[1].A90V1_6_1__NOKIA_N56_16m_En_Ru_Fr_Th_Vn_Ar.B0M.bi