View Full Version : Sagem microphone?
gsmsalers
08-15-2002, 15:33
Hi,
How to repair sagem phone no microphone? Changing microphone is not help? How to resolve it?
chris922
08-15-2002, 18:29
do to http://www22.brinkster.com/mysagem
and download my GainControl-Program.
If it is a software problem, you can write the fields for microphone and loudspeaker.
usernome
08-17-2005, 12:30
The site doesn't exist anymore .
Another link ?
Thanx !
Is there any chance to replace microphone from My V55/X55/X5-2 with some other microphone?
wbr.
gabiz_ro
08-27-2005, 00:53
I think is the same type like in spv c500.I replace one with this components.as far as I remeber these two microphones look identical. microphone used is from samsung phone (very small)
@gabiz_ro
Thanks for solution, it realy works also with small microphone from Samsung E710/700
Thanks again.
gabiz_ro
09-04-2005, 23:38
glad to can help .
gabiz_ro
11-05-2005, 15:46
corection.
better results are obtained with 5k6 resistor.
with 10K is too weak audio from microphone.
ramongaru
03-16-2006, 12:36
hello pls can anybody tel me wat is 10K resistor & were 2 get dis resistor or 5/6K to work on dis fone, pls costormer is troubling me
motorola v3 microphone is 100% tesed solution...
thanks for the info. i just fixed one
SAM7_LAJILI
05-19-2007, 23:06
thanks sussesful100% tesed solution
I friend have tested this solution on 2 v55 but woking what do i do pls
mindasxxx
05-26-2007, 16:14
hey. my anybody know, how to connect sagem my x5-2 microphone to phone, if pins on phone are broken? where i have to connect on pnone u+ mic, gnd, and audio in pins?
meo786pk
06-06-2007, 11:26
Dear brother check it and post the results
hey. my anybody know, how to connect sagem my x5-2 microphone to phone, if pins on phone are broken? where i have to connect on pnone u+ mic, gnd, and audio in pins?
i have sagem x5-2 problem micro .i change micro (with original and modified ) always same problem .it can be soft problem :confused:
mindasxxx
06-08-2007, 13:57
Dear brother check it and post the results
.......................................
mindasxxx
06-08-2007, 14:01
yes
. i know what pis are on sagem microphone. but on my sagem main pcd (phone circuit) pins are broken, in one hand i have microphone, in another i have phone .
and i dont know where connect microphone 4 pins to phone pcb. i need phone circuit.
mobile123
06-09-2007, 10:09
I placed mice as per diagram but no outgoing sound but, during call when we press keypad beep sound comes on other phone now tell me plz what is the or where is the problem ?????
connecteur charge, cristal connecteur charge 100/100
:D:Dtested by me work 100/100 some pb sagem causer par connecteur charge