Can't repair 3 phone

[BABAK NURI]

hi dream team
I have 3 phone,damage gdfs but no red blinking
2 k800 @ z610
First k800,after bypass stage 1,always fails.
sec k800,all stage finish but white screen,z610 is same

[FullFLASHgSMPH]

but no red blinking


Flash first then put logs here:

try this procedure:

http://gsmhosting.net/vbb/showthread.php?t=532266

BR

[DreamSupporter]

Hi BABAK NURI!
Please, put here logs with errors for first K800.
Try to write GDFS from worked phones on second K800 and Z610.

[matin-gsm]

also i had a k320 blinking at SE logo .
all things tried , some times get "gdfs structure damaged" some times get "try to write firmware" some times done without any problem but after repair , just fone turn ON 1 time and during " please waite ' screen start blinking , after that fone just blinking blue screen when press power ON button .

[BABAK NURI]

Hi BABAK NURI!
Please, put here logs with errors for first K800.
Try to write GDFS from worked phones on second K800 and Z610.
Thanks a lot DreamSupporter
i have good gdfs file.test for upper 100 phone(k800)all no problem
send log for afternoon

[BABAK NURI]

log for first k800
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359088-*********x
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

[BABAK NURI]

-- Reading Info-------------------------------------------
User selected phone Z610 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-************
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Starting CS Loader GDFS Service ...
GDFS Simlocks :
Lock 0 = OFF (00) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 000-00

Done.

-- Write GDFS-----------------------------------------------------------------
User selected phone Z610 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-******x
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Flash Chip : Intel 48F50xxM0Y0
Flash Chip ID : 887E0089
Generating GDFS...
Writing GDFS...
Done.

-- Security Bypass------------------------------------------------------------
User selected phone Z610 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-739284-7
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-*********x
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2180446215407DB4
Finalizing ...
Stage 2 completed succesfully
Done.

-- Unlock and Repair----------------------------------------------------------
User selected phone Z610 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352836-01-******xx
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2180446215407DB4
Reading GDFS...
Testing security ...
GDFS 0013 Hash Failed
GDFS 0006 Hash Failed
GDFS 000E Hash Failed
GDFS 001C Hash Failed
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

[alfox]

try this steps bro

1. get tested z610 gdfs file
2. Select in model list - z610
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write full GDFS (look in p.#1)
7. After flashing GDFS go to Security tab & make "Unlock & Repair GDFS Security Blocks."

If that not help:
"Security Bypass" Operation must be executed.

1. get full flash for z610
2. Select in model list - z610
3. Select Access Mode - Security Bypass
4. Go to Misc tab & Write Full Flash (look in p.#1)
5. After flashing go to Security tab & make "Unlock & Repair GDFS Security Blocks."
6. Flash Main+FS+Custompack.

[mike67]

Please can someon post tested z610 gdfs >> i am getting white screen aftr writting gdfs in setool support site ''

thanks
mike

[GSM Dream]

Hello!
Try to download this one: http://forum.gsmhosting.com/vbb/showthread.php?p=3177896&highlight=z610#post3177896