help TP w200

[gsm_enggine]

please help me
i want to repair w200 red blink but wen i conect TP still hear tiiitttttttttt...sound and the program freeze....

http://www12.indowebster.com/fab3e51a93afb13d51ed4c055a2f3839.jpg

any one help me please
the phone now is dead and red blink


br.

[ProfesionalGSM]

Do you remove glue from TP pins ?

[~ Nawab Traders ~]

Post log here bro
After that it would be easy to solve your problem.

[~ Nawab Traders ~]

Do you remove glue from TP pins ?
Read carfully his post bro
he write on conecting there is a sound like......
Without removing glue or proper conection software cant make some kind of beep or noise. ;)

[gsm_enggine]

this the log

first
-- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color = 4 : RED
EROM CID = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-661324-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ... -
Error : Invalid GDFS structure and/or configuration.
Hint : Try to flash firmware.
Error : Failed.

then i flash with db fw and this the log

-- Writing firmware-----------------------------------------------------------
User selected phone W200 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color = 4 : RED
EROM CID = 52
Sending Main Firmware Certificate ... OK.
Writing Main Firmware Blocks Finished.
Sending File System Certificate ... OK.
Writing File System Blocks Finished.
Starting CS Loader GDFS Service ...
Error : Failed

and i try repair again but when tp conected stiil noise sounds

this the log

User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color = 4 : RED
EROM CID = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-661324-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Warning : Aborted by user.


br.

[FullFLASHgSMPH]

Error : Invalid GDFS structure and/or configuration.
Hint : Try to flash firmware.
Error : Failed.


Flash cruiser or setool same firmware

TESTED on error UNLOCKING...
unlock it agin dreambox

[paullovinicius]

Flash cruiser or setool same firmware

TESTED on error UNLOCKING...
unlock it agin dreambox

Or try XS++, it's free software to flash DB2010/DB2012/DB2020...

[sahil00150]

xs++ does not support w200i

[GSM Dream]

Looks like hardware issue.

[hackerbd]

Could you tell us please which DBBS version you use?

[BumbaRumba]

Try to use latest version ( I agree with hackerbd :-).

[BumbaRumba]

I think your issue was fixed in version 3.6.
Look here http://gsmhosting.net/vbb/showthread.php?t=559384

if your version is greater, report this issue to supporter

DBSS v3.6, DreamBox firmware v1.13
Dear users,
We are pleased to announce a release of new versions of DBSS v3.6 & DreamBox firmware v1.13.

In this update:

1. Enabled support for DB2012 platform (CID 53) of the following Sony Ericsson models:
* K series: K310, K320, K510
* W series: W200, W300, W810
* Z series: Z530
The following options are added.
o Repair GDFS.
o Standalone permanent unlock by Testpoint.
o Multiflash FOTA/Main Firmware/File System using DCU-60 cable.
o Read/write full flash.
o Read/write GDFS.
o Phone customization.
o Change CDA.
o Read phone info.
o Read phone internal diagnostic log.
o Reset Call Timer.
2. Improved "Repair GDFS" operation. From now, the correct GDFS structure and configuration are not required.

NOTE
The Stage 1 Testpoint for the DB2012 platform has been changed. For more details please refer to the PCB diagram in DBSS.

More features to come.
Best regards,
GSMDream team