PDA

View Full Version : K510 2 stage fail *** time

Ciux
05-02-2008, 19:42
Dear Supporters,

I have problem to bypass on 2 stage on K510.
5 times fail. I give up until I do not hear what you say.
I have old hardware, I press START on first stage, and pass, and
press START on second stage and hold needle until he report fail :confused:


log is here:

-- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Hint : Now the probe might be disconnected
Processing ... /
Error : Testpoint failed. Check pin and try again.
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Warning : Aborted by user.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone K510 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color = 4 : RED
EROM CID = 50
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 358397-01-688***-7
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 50
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
paullovinicius
05-02-2008, 20:10
Maybe wrong test point...
Update DBSS to 2.4.2, it solves a problem with some phones can't enter in Stage 2.
Remember that Stage 2 uses other test point, not the same that Stage 1, and you need to stay needle pressed for until DBSS say to you release it(Stage 2 TP spends more time than Stage 1 TP).

Other tip: if you do "Stage 1" once, you don't need to do again. Uncheck Stage 1, check only Stage 2.
FullFLASHgSMPH
05-03-2008, 02:13
its time to

GO last TP2 means TP2 not connected
..::Mr999::..
05-03-2008, 05:47
use tick on auto start also

Br ;)
Ciux
05-03-2008, 09:23
Maybe wrong test point...
Update DBSS to 2.4.2, it solves a problem with some phones can't enter in Stage 2.
Remember that Stage 2 uses other test point, not the same that Stage 1, and you need to stay needle pressed for until DBSS say to you release it(Stage 2 TP spends more time than Stage 1 TP).

Other tip: if you do "Stage 1" once, you don't need to do again. Uncheck Stage 1, check only Stage 2.


I think is problem because missing pin close to IC on stage 2.
You can see under glue on second stage close to IC missing pin.
I did not make this becuse is glue on top. All pins have, and missing od STG 2.
Ciux
05-03-2008, 09:42
one better picture to see.
tostefo
05-03-2008, 21:06
you must check at stage one you need pin 27, on stage two 37...........from your picture seems 37pin is broken / damaged byt i see some of the pin still there, so you must be very careful with probe and try to reach it, otherways you must desolder CPU, make bridge with wire from pin 37 to outside, solder CPU and perform operation again with stage one - pin 27, stage two wire from pin 37
WBR
Ciux
05-05-2008, 08:10
YOUR ARE TOUCHING WRONG PIN AS TP IN STAGE 2ND CHECK IT WITH OPENED EYES & THEN CONNECT STAGE 2ND TP OK BRO



I touch pin 37 for 2-nd stage. Look second picture and count, not first one.
First one is not good!!
My aye's are OK
emilkawa
05-05-2008, 17:54
I has the same problem ... some days ago. I've tryed many times and stil was the same error as you write.
Today morning i've reflashed my k510i (also by dreambox) and after this "security bypass operation" worked perfect from 1 time.... of course unlock also.

thanks drambox, emilkawa
Ciux
05-05-2008, 19:38
I has the same problem ... some days ago. I've tryed many times and stil was the same error as you write.
Today morning i've reflashed my k510i (also by dreambox) and after this "security bypass operation" worked perfect from 1 time.... of course unlock also.

thanks drambox, emilkawa


I do not have this phone any more in my hands. I return it to customer.
Next time I will make like you.
Dreambox supporters also need to say some advice sometimes ;)
emilkawa
05-06-2008, 00:16
I do not have this phone any more in my hands. I return it to customer.
Next time I will make like you.
Dreambox supporters also need to say some advice sometimes ;)


that's right., but why is inscription
Warning : Detected platform is different from selected

I know what i selected and it was k510. Anybody know?
Emilkawa