w850 white screen?

[SANGURAN_BOX]

hi dream box team any sulotion w850 white screen only. i test tp stages 1 and 2 its works but its same white screen again..here the log
-- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352401-01-990502-9
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352401-01-990502-9
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352401-01-990502-9
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 218091601560D2F1
Finalizing ...
Stage 2 completed succesfully
Done.

--- Unlock and Repair----------------------------------------------------------
User selected phone W850 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ...
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352401-01-990502-9
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 218091601560D2F1
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.



help plse...

[GsmLiberty]

Read full flash other phone (same model) and write.

[GSM Dream]

Hello!
The best answer for you:

Next time use SEARCH (http://forum.gsmhosting.com/vbb/search.php)

1. Download that file - W850_full_flash (http://rapidshare.com/files/102191395/W850_full__Intel_BO__Cid52_before_TP.rar)
2. Select in model list - W850
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Sec. Blc."
8. Go to Flash tab & flash: Main+FS+Custpac.

If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...

[SANGURAN_BOX]

I Try Ur Sulotion Not Work..maybe Harware Top Board Our Flexcable..

Thanks For Help..

[freeman2001]

it's the Top Board problem change it bro





wbr

[SANGURAN_BOX]

i need gfds files for w850..plse.....

thank you

[Dawoodgalaria]

I Try Ur Sulotion Not Work..maybe Harware Top Board Our Flexcable..

Thanks For Help..


hi I have w850 where i can only see se logo and then screen goes white.
i had flashed it with both the files using se tool.

changed the screen also. It has the same problem..

can u suggest me please

thanks

dawood

[SANGURAN_BOX]

hi I have w850 where i can only see se logo and then screen goes white.
i had flashed it with both the files using se tool.

changed the screen also. It has the same problem..

can u suggest me please

thanks

dawoodtry to fash again u need to high verson our upgrade ur cid 52.. ;)

[Mehdi Ghorbani]

press identify with setool...if detected k700 change flex cable and top side of board.

[Softway]

this is 100% hardware problem... change upper keypad part. all will be ok