G600 Keypad Problem Solved [Archive]

lahoot

05-09-2008, 10:39

if any body facing keypad stuck problem in samsung G600,so tell me i will sovle ur problem.......:cool:

nabildeco@yahoo

05-09-2008, 18:45

i have mate, i have G600 with 1+3+call keys doesn't work !!!!!!!! kindly give me solution :)

lahoot

05-15-2008, 12:19

dear its common print is damage,trace it with another g600 motherboard

lahoot

05-15-2008, 12:21

i solved g600 full keypad stuck problem wich is not traced by another person in this forum.

janinuk

06-02-2008, 13:59

hi i have one g600. and the keypad freezes all the time. i have changed the flex to check if its ribbon fault. but all in vain. can somebody plz help me about it. thx in advance.

lahoot

06-07-2008, 10:36

hi i have one g600. and the keypad freezes all the time. i have changed the flex to check if its ribbon fault. but all in vain. can somebody plz help me about it. thx in advance.
its not ribbon problem,remove veristors wich r loacated near at keypad connector on motherboard.very simple:cool:

janinuk

06-07-2008, 14:48

can you upload a picture if possible? and thx for your cooperation.

burdie

06-22-2008, 22:25

Hello Lahoot,

Could you please tell me the solution? I have the service manual, but it doesn't say where the varistors are...

Please e-mail me at bart001@gmail.com

Thanks!

lahoot

06-24-2008, 10:47

if anyone have motherMoard Picture send to me i will pointOut fault and send here for all........................

..::Mr_Fone::..

06-24-2008, 13:09

if any body facing keypad stuck problem in samsung G600,so tell me i will sovle ur problem.......:cool:

give me solution with photo thx in advance ................;)

simlock

07-01-2008, 17:02

its not ribbon problem,remove veristors wich r loacated near at keypad connector on motherboard.very simple:cool:

as too big to upload here

simlock

07-02-2008, 11:12

hi please can you tell me where resisters are and main board to remove for keypad fix thank you :D

aliasif83

07-07-2008, 16:27

i have G600 i changed the body but up and down buttons are not working it works when i opend the phone but when i closed the phone buttons are stop working

llcoolr

07-16-2008, 21:42

here is picture uploaded

http://forum.gsmhosting.com/vbb/showpost.php?p=3486076&postcount=1

lahoot

07-18-2008, 15:02

Pic Quality is not to Good but hope u can understand to point

Seedy

07-19-2008, 22:34

anybody got a better picture, also isnt the 2 pictures conflicting ?

llcoolr

07-20-2008, 11:26

anybody got a better picture, also isnt the 2 pictures conflicting ?

folow link

http://forum.gsmhosting.com/vbb/showpost.php?p=3486076&postcount=1

Seedy

07-20-2008, 11:36

folow link

http://forum.gsmhosting.com/vbb/showpost.php?p=3486076&postcount=1

thanks - but they need changing or removing ?

llcoolr

07-20-2008, 11:42

thanks - but they need changing or removing ?

u can remove but better is to change

:)

Seedy

07-20-2008, 11:44

u can remove but better is to change

:)

Thank you for quick response - final question can i remove all 3 and not replace or do one by one ?

llcoolr

07-20-2008, 11:48

Thank you for quick response - final question can i remove all 3 and not replace or do one by one ?

for me
i have removed D700 and D701
and all was good

lahoot

07-21-2008, 11:54

just remove D702 D703 D704 D705 ,I remove these 4 diodes and my problem solved post reply must

aurora41

07-21-2008, 22:08

help !!!! my e700 screen has gone white. and i cant acess pics nor phone numbers

aurora41

07-21-2008, 22:12

Help!!!! im new here and also lost in navigating
help !!!! my e700 screen has gone white. and i cant acess pics nor phone numbers:( :( :( :(

aurora41

07-21-2008, 22:13

Help!!!! im new here and also lost in navigating
help !!!! my e700 screen has gone white. and i cant access pics nor phone numbers

please help and send reply to frz_c@hotmail.com

cellsolutions1

07-24-2008, 08:59

just remove D702 D703 D704 D705 ,I remove these 4 diodes and my problem solved post reply must

nice work mr lahoot hope u giving more solutions :)

.:Morpheus:.

07-24-2008, 11:28

nice work mr lahoot hope u giving more solutions :)

i have try it but still same problem no any key work any idea whats wrong ? ?

lahoot

07-24-2008, 11:45

i have try it but still same problem no any key work any idea whats wrong ? ?
remoove side volume keys one by one and then check....

.:Morpheus:.

07-24-2008, 12:39

i did this but same problem aswell very strange any other idea please ?

RuseV

07-24-2008, 13:16

my keypad dont working . change mic and keypad work 5 min and not working

arimob

11-05-2008, 14:14

hey broo I remove 2 components but the same problem :S:S pls heeelp me !!

eaglemobiles

11-08-2008, 16:27

after remove the 4 resisters now the * 0 # not working, please anyone can help.
Thanks

eaglemobiles

11-19-2008, 20:46

Any Help please urgent

Thanks
Br

goldblock

01-21-2009, 10:49

Hi can you help my keypad is not working apart from on and off switch.
Have changed flex,screen and flashed twice but still not working.
Any ideas ????
Thanks

altamedia

01-22-2009, 18:49

Me too the * 0 # not working, please anyone can help.
Thanks

bill28

01-23-2009, 19:16

Please, I want all the special quad Balsamsonj

mzabbasi79

01-24-2009, 14:48

i have e250 keypad problem. i have changed the strip but no result. please brief with diagram

selldok

02-13-2009, 10:25

remove these components one bye one and dont remove with tweezer or any other tool only remove with soldring iron,then u dont face any problem like *0# not working,good work lahoot thanks

zeking82

03-06-2009, 14:06

my keypad dont working . change mic and keypad work 5 min and not working

just cut camera key from keypad:)

dale9999

08-17-2009, 16:21

hi lahoot, i have keys not working on g600 i removed d702 n d703 it worked fine for 2 days then back to same keys not workin. i now removed d704 n d705 and still keys 2,4,5,6 and option and exit keys dont work any ideas how to fix ?

dale9999

08-17-2009, 17:14