unlock j750 after modification cable E210

[leader_gsm]

Eub cable have prob with connection in rj45 only, try to see this solution to connect your phone (tested and all is Ok j750 unlocked (direct unlock))

http://www.gsmhosting.net/vbb/showpost.php?p=3120892&postcount=97
thx to



EMINEMGSM

br

[Ja\/\/aD]

originally posted by EMINEMGSM on 28-02-08 at 10:46 PM:
For who have problem with j750 connecting " Eub combo cable" , phone start automatic charge and don't connect and have this error:

Connecting to phone... (Press Power ON for a short time)
ERROR - Can't connect to phone! [ERR#02]

Just make a little modification , cut power on line to use Rj45. phone stop charging and connect when press power on.
Don't forget to resold this line to use usb connection

http://www.gsmhosting.net/vbb/attachment.php?attachmentid=143166&d=1204224373

[leader_gsm]

yes I know but I wanted to say that the solution works very well

[Ja\/\/aD]

i want to just clear pinout picture, instructions!!

[m_naeem]

no solution... we are cutting usb but using rj 45? strange

[aErOm]

no need to cut any ... JUST PLUG THE RJ45 connector for making any BROADCOMM model !!

[boucettay]

Unlock j750,j400 goes very well but when connection good, for me i have to try many times to be able to connnect don t know why, just error 002, but when soft recognize phone, it take 1 sec no more....but this after +6 tries.
I'll try to cut and post result...even i don t understand why to cut usb it we r using ftdi with rj45 cable side only.

[aErOm]

Unlock j750,j400 goes very well but when connection good, for me i have to try many times to be able to connnect don t know why, just error 002, but when soft recognize phone, it take 1 sec no more....but this after +6 tries.
I'll try to cut and post result...

this problem can be caused due to a bad communication between phone and Pc of course EUB is not causing this bad communication, from us all what we can help is offering a FTDI interface to make this communication better, and we did by launching the EUb interface for making easier to all.

Other thing that can cause this bad communication is having PC with lot of softwares running in the tasks or so ... please check that EUb is just a small part of the softwares and the most of the resources are being used by other app´s running when PC is on, just clean PC with non used app´s and I think this can be fine for your work.

Best Regards !!

[boucettay]

this problem can be caused due to a bad communication between phone and Pc of course EUB is not causing this bad communication, from us all what we can help is offering a FTDI interface to make this communication better, and we did by launching the EUb interface for making easier to all.

Other thing that can cause this bad communication is having PC with lot of softwares running in the tasks or so ... please check that EUb is just a small part of the softwares and the most of the resources are being used by other app´s running when PC is on, just clean PC with non used app´s and I think this can be fine for your work.

Best Regards !!

Thnaks for fast reply and good support. but this problem i get it only with this kind of mobiles, for example c180 which uses same cable procedure is going like charm in first try and i'm using the same ftdi (polarbox/unibox) coz i'v dongle eu.
No problem, coz finally i always finish by unlocking phone....EU king of samsung.
Gracias chicos for hard work....long life to EU box and new updates we all hope

salu2

[ABDELFATTAH NET]

no need to cut cable br I use E210 cable with no prb
only you need to connect phone without baterry first while soft runing , after a few second put baterry and enjoy
br abdelfattah

[Ja\/\/aD]

@boucettay thanks for comments about EU BOX and EU Team
We are really Hard working, and try to make good support and World First Updates

Regards

[.:Towhid:.]

After Modify Good Work on J400. Its Great.......................

[Ja\/\/aD]

@.:Towhid:. thanks for Report ;-)