View Full Version : Chinese models with Infineon CPU
InfinitySupport
05-18-2008, 23:37
Hello,
If you have new models with Infinieon CPU (f.e. 7880), we can try to support these models.
What to do:
1. Run Infinity-Box "Pana01" module
2. Select "LG KG375" model
3. Read full flash
4. send the next information to InfinityBoxSupport@gmail.com
4.1. phone model name and CPU chip name
4.2. pinout information
4.3. "operation.log" file
4.4. full backup file
We will check your information and will try to add new model
.::PATEL TELECOM::.
05-19-2008, 05:32
sir i have 7870 cpu can i read this phone with this??????
sir i have 7870 cpu can i read this phone with this??????
Dear simply read this don't asking again & again........http://forum.gsmhosting.com/vbb/showpost.php?p=3323795&postcount=1
kabirhossain
05-19-2008, 07:04
good your information infinity team..........Thanks
RaSkAl01
05-19-2008, 09:55
thanks ınfıty tem good work............
InfinitySupport
05-19-2008, 20:36
@SHOEB AHMED
@elkawasmy
Current thread is about Infineon CPU, if you have anything to write regarding this topic, please write, in other case, please, write in other threads
andra widianto
05-19-2008, 21:36
i have NOKLA E90
already send
may can faster supported infineon cpu ;)
step :
1. Run Infinity-Box "Pana01" module
2. Select "I-Mobile 100" model
3. Read full flash
4. send the next information to InfinityBoxSupport@gmail.com
txs
.::BHATTI::.
05-21-2008, 12:06
yes absolutely it will be giving us more Grip to chinese phones ....
shantilal
05-21-2008, 14:07
dir sir,
here is log detail flash file send to u with photo
here is pinfinder log
software version: 1.09
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:3 Tx:4
time required: 7 sec
Power On !
and
here is readed with pana01.exe log
Application: C:\Program Files\InfinityBox\Pana01\Pana01.exe
Loading data, wait...
[Infinity Box] v1.47
S/N: 08A7:010E
Wait...
Current model: LG KG289
Ready
Current model: LG KG275
COM7 [VCP0] selected
Device: LG KG275
Checking data, wait...
Action: read flash
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_LG KG275_eeprom-sta_20080521-165453.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_LG KG275_eeprom-sec_20080521-165457.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_LG KG275_eeprom-complete_20080521-165507.B1E.bin
backup critical area Done
Check memory...
reading [flash]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_LG KG275_flash_20080521-170129.B1X.bin
completed
Finished, Remove/Install battery now !
good your information infinity team
b.r
yuvi
InfinitySupport
05-21-2008, 19:25
that means now we flash CGC Phone? Thanks..................
What is "CGC Phone" ?
great work here
thnx infinity support
elkawasmy
05-21-2008, 21:34
Hi Infinty Team,
i have phone (ZTC ZT9288) i found pinouts by pin-finder but i cant read flash like u said look at pic no.2 it cant boot whats the problem???
Br,
Elkawasmy
andra widianto
05-21-2008, 22:48
are u have try
1. Run Infinity-Box "Pana01" module
2. Select "I-Mobile 100" model
3. Read full flash
4. send the next information to InfinityBoxSupport@gmail.com
txs
kirpiksk
05-21-2008, 23:35
Hi Infinty Team,
i have phone (ZTC ZT9288) i found pinouts by pin-finder but i cant read flash like u said look at pic no.2 it cant boot whats the problem???
Br,
Elkawasmy
hi bro
you select model kg275 but kg375 device selected;)
alamgir80
05-22-2008, 14:47
What is "CGC Phone" ?
http://www.gsmhosting.com/vbb/showthread.php?t=518376&highlight=cgc
pinout here
good info............. thank's infinity team.........
elkawasmy
05-26-2008, 02:14
hi bro
you select model kg275 but kg375 device selected;)
i know that i tried also with kg375 and same problem
am still waiting for Infinty Team answer??? :confused:
BR,
Elkawasmy
Faisal_Computer
05-28-2008, 17:35
@ Infinity Please read this (http://www.gsmhosting.net/vbb/showthread.php?p=3352083#post3352083)
and sorry
Br
Faisal_Computer
Paki Mobile
05-29-2008, 14:54
Phone Model # Mobily NR1
CPU # Infineon 7880
Pinout # Rx:11 Tx:12
Read Flash Flies Here # THIS (http://www.mediafire.com/?irslyzi1grx)
ztc zt321
dual sim,, with infeneon cpu pmb6814and spansion flash chip working fine but suddenly became dead... i triedall soutionbut unable to attach with infinity any suggestion plzzzz.
regards
plz help me i lost my infinity main setup driver .any one send the drivers 2.1 .email .rayhan_9@yahoo.com
Phone model : Startech ST21i
CPU : Infineon e-gold (Can't open phone, still have warranty seal)
Pinout : Rx:11 ; Tx:12
Connector : 1 x 18 (L18A)
File already sent to gmail.
Need support for unlock user code. Thanks
alamgir80
07-26-2008, 07:50
when i,m select kg375 & read full flash ok .but file too low size 3.45mb it need minimum 8mb. phone model CGC NOKLA ZT588
alamgir80
07-26-2008, 13:57
we need manual flash area read write option for infineon CPU phone
ranubhai
07-27-2008, 07:06
how to unlock spice s410 pls help me COM4 [VCP11] selected
Action: read codes
unlock method: read codes
Model: Spice-S410
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6205:8B00]...
CPU: MT6205
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 97 sec
Remove/Install battery now !
To Infinity Support : Thanks you for the support. Now i can unlock user lock for startech st21i.
Really really great support. Here is the log
Current model: Startech-ST21i
COM4 [VCP0] selected
Device: Startech-ST21i
Checking data, wait...
Action: reset
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
sw version: ULC2GL 0 A 0 q
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Startech-ST21i_eeprom-sta_20080728-191339.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Startech-ST21i_eeprom-sec_20080728-191341.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Startech-ST21i_eeprom-complete_20080728-191343.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Write Done
Finished, Remove/Install battery now !
Time used: 21 sec
Great job. thanks a lot for this great support.
kirpiksk
07-30-2008, 08:26
sagem my220v unlock infineon cpu okkk
COM1 [VCP0] selected
Device: Sagem-my220v
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
sw version: EBI_IH_290607_1125 290607_1125 EBI_IH Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220v_eeprom-sta_20080729-140723.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220v_eeprom-sec_20080729-140727.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220v_eeprom-complete_20080729-140733.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 176 sec
Unlock instruction:
1. Power-On phone
2. Enter code: 12345678
alamgir80
07-30-2008, 09:49
Read thread after post correct section
alamgir80
08-01-2008, 09:33
pls infinity do somthing for infineon cpu based china phone
see link http://forum.gsmhosting.com/vbb/showthread.php?t=572202
infinion 7880 cpu reset information................
!! select vodaphone 225 and make reset !!
alamgir80
08-23-2008, 05:46
i 'm waiting for infineon 7880 cpu based update. please do something
juwanapati
08-26-2008, 06:01
i have one , please make full suport for this phone !
http://gsmhosting.com/vbb/showthread.php?t=584085
harun_warsanto
08-27-2008, 15:16
What 'bout beyond b610 ? I've already post HERE (http://forum.gsmhosting.com/vbb/showthread.php?t=549979&highlight=B610)
And here is the pinfinder log.
software version: 1.14
cable type: 1x12 (L12C)
platform: PMB: Infineon s-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:12 Tx:9
time required: 51 sec
Power On !
I want to read flash, but I don't know what module/phone type to make it :confused::confused::confused:
alunecosu_hd
08-27-2008, 16:23
Hi .This tip procesor infineon can I edit language ?
sakariya
08-30-2008, 16:58
any one can give cect c600's flash file infineon cpu 7850
pls help me
juwanapati
09-05-2008, 05:44
What 'bout beyond b610 ? I've already post HERE (http://forum.gsmhosting.com/vbb/showthread.php?t=549979&highlight=B610)
And here is the pinfinder log.
software version: 1.14
cable type: 1x12 (L12C)
platform: PMB: Infineon s-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:12 Tx:9
time required: 51 sec
Power On !
I want to read flash, but I don't know what module/phone type to make it :confused::confused::confused:
u can use pana 1.50 !
harun_warsanto
09-05-2008, 16:02
u can use pana 1.50 !
And which phone type i can used for bro???
Thanks,
Merdeka !!!:D
alamgir80
09-19-2008, 14:32
other box make update for infineon cpu based china phone, but infinity don,t make any update for this type phone.
juwanapati
10-04-2008, 10:26
i have my G 110 !
this log using pin finder !
software version: 1.14
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM5...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:7 Tx:8
time required: 21 sec
Power On !
saved: my_G_model_110
but my problem is when i try to use pana 01 to read this model it says error , even i try to use all phone type in pana 01 one by one ! i hope infinity team make great ubdate for infineon cpu because they are to many infineon cpu phone model sale in the market with lowers price so many costumer have this model , and not tu much box suportt for infineon cpu !
kabirhossain
10-16-2008, 20:43
Infineon 7850,7860,7870,788 Problem hang.restart.dead.security code.flash file size 2mb-32mb please add.
good job infinity support*
Shubhanshu~
10-22-2008, 16:54
software version: 1.14
cable type: 1x18 (L18B)
platform: PMB: Infineon e-gold
searching adapter at COM13...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:11 Tx:10
time required: 76 sec
Power On !
saved: G-Tide_G5310
------------------------------------------------
CPU:- 7880
-------------------------------------------------
COM13 [VCP0] selected
Device: LG-KG375
Checking data, wait...
Action: read flash
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
460800
Set Baud Done
Connecting...
flash: 00BF:7353
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\G-Tide_G5310_LG-KG375_eeprom-sta_20081022-200039.B1E.bin
loading data...
data loaded
imei: ˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙
reading [eeprom-sec_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙]...
file saved: C:\Program Files\InfinityBox\Pana01\G-Tide_G5310_LG-KG375_eeprom-sec_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙_20081022-200103.B1E.bin
reading [eeprom-complete_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙]...
file saved: C:\Program Files\InfinityBox\Pana01\G-Tide_G5310_LG-KG375_eeprom-complete_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙_20081022-200111.B1E.bin
backup critical area Done
Check memory...
reading [flash]...
file saved: C:\Program Files\InfinityBox\Pana01\G-Tide_G5310_LG-KG375_flash_20081022-200554.B1X.bin
completed
Finished, Remove/Install battery now !
Time used: 350 sec
----------------------------------------------------
File Sent To Support.
juwanapati
10-23-2008, 08:01
software version: 1.14
cable type: 2x7 (L14B)
platform: PMB: Infineon s-gold
searching adapter at COM5...
adapter found, version: 2000
pins: 14, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:5 Tx:4
time required: 24 sec
Power On !
saved: cross_GG_60_CPU_S_GOLD
can detect but can't work with infinity software , like pana 01 or other !
infinity team please give great ubdate for infineon cpu , i hope one software just for infenion based !:):):)
shariflalon
10-26-2008, 12:03
phone model CGC NOKLA ZT588 keypad lock????
Full flash compleat but lock still now..............
shantilal
11-05-2008, 13:59
today i check dead set with infineon cpu
back labale cect 9898 silver color doul sim
choose coral 200 model and reset
set is on
here is log----
Cable: 1x18 (L18B)
software version: 1.14
cable type: 1x18 (L18B)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:12 Tx:11
time required: 80 sec
Power On !
COM7 [VCP4] selected
module v1.53
Device: Coral-200
Checking data, wait...
Action: reset
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0098:0049
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sta_20081105-181509.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sec_20081105-181512.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-complete_20081105-181519.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Write Done
Finished, Remove/Install battery now !
Time used: 27 sec
shantilal
11-05-2008, 14:14
today i check dead set with infineon cpu
back labale cect 9898 silver color doul sim
choose coral 200 model and reset
set is on
here is log----
Cable: 1x18 (L18B)
software version: 1.14
cable type: 1x18 (L18B)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:12 Tx:11
time required: 80 sec
Power On !
COM7 [VCP4] selected
module v1.53
Device: Coral-200
Checking data, wait...
Action: reset
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0098:0049
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sta_20081105-181509.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sec_20081105-181512.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-complete_20081105-181519.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Write Done
Finished, Remove/Install battery now !
Time used: 27 sec
same set repeat with pin finder and result is here
software version: 1.14
cable type: 1x18 (L18B)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:8 Tx:9
time required: 54 sec
Power On !
COM7 [VCP4] selected
module v1.53
Device: Coral-200
Checking data, wait...
Action: read flash
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0098:0049
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sta_20081105-184019.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sec_20081105-184022.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-complete_20081105-184029.B1E.bin
backup critical area Done
Check memory...
reading [flash]...
shantilal
11-05-2008, 14:24
test dead q7
after reset set is ok
here is log ----
software version: 1.14
cable type: 2x6 (L12B)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:3 Tx:10
time required: 14 sec
Power On !
COM7 [VCP7] selected
module v1.53
Device: Coral-200
Checking data, wait...
Action: reset
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sta_20081105-160453.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-sec_20081105-160458.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Coral-200_eeprom-complete_20081105-160505.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
reset...
done
Write Done
Finished, Remove/Install battery now !
Time used: 31 sec
gsm2start
11-09-2008, 00:40
thank you great job
regards
rashel.com
11-23-2008, 12:00
new flash chip
Maximus
Model C92
Infinion 7880 (CPU)
SST
34HF3284
70-4E-L1pE
0734095-B
new flash chip
Maximus
Model C92
Infinion 7880 (CPU)
SST
34HF3284
70-4E-L1pE
0734095-B
sir same proble with me............................
alamgir80
11-23-2008, 14:01
new flash chip
Maximus
Model C92
Infinion 7880 (CPU)
SST
34HF3284
70-4E-L1pE
0734095-B
i have this phone with phone lock
i have this infenion cpu Q300A software version: 1.16
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (A0)
result: Rx:2 Tx:3
time required: 4 sec
Power On !
this is the result of pinfinder , but sofware cannot boot phone, just cant detect phone , please, help inf. team.
i have this infenion cpu Q300A software version: 1.16
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (A0)
result: Rx:2 Tx:3
time required: 4 sec
Power On !
this is the result of pinfinder , but sofware cannot boot phone, just cant detect phone , please, help inf. team.
InfinityHelp
11-24-2008, 19:49
i have this infenion cpu Q300A software version: 1.16
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (A0)
result: Rx:2 Tx:3
time required: 4 sec
Power On !
this is the result of pinfinder , but sofware cannot boot phone, just cant detect phone , please, help inf. team.
hello!
which software do you use to boot phone?
hello!
which software do you use to boot phone?
i used cect and found Q300A , WHEN I OPPENED IT, it was chinase miracle , so, this is what i used. thank you.
best_unlocking
12-01-2008, 17:23
sir chain mobile copy E 61
S 605
tow some mobile
but Jazz sim and u sime not work
plz help
rashel.com
12-05-2008, 20:26
new flashchip
Moblile BIRD
model S658
Infinion 7880 (CPU)
SST 34HF3284
70-4E-L1pE
0734095-B
please pupport this model
InfinitySupport
12-08-2008, 00:52
new flashchip
Moblile BIRD
model S658
Infinion 7880 (CPU)
SST 34HF3284
70-4E-L1pE
0734095-B
please pupport this model
Hello,
Please, try to read flash from this phone f.e. like from LG KG370.
Let's see results.
InfinitySupport
12-08-2008, 00:56
Dear Friend,
Here is link for software that probably (we are not sure but it may be so) will be useful in some cases.
unlock/imei tools included: http://www.infinity-box.com/download/public/7880.rar
We did not provide any support for this software, you can try it and report about results.
Hi
Infineon and Spreadtrum CPU Language editor?
i have this infenion cpu Q300A software version: 1.16
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (A0)
result: Rx:2 Tx:3
time required: 4 sec
Power On !
this is the result of pinfinder , but sofware cannot boot phone, just cant detect phone , please, help inf. team.
juwana_pati
12-12-2008, 02:51
thats the fact of infinty soft , they can detect but can't do anything than ! specialy for infineon cpu and spd !
please infinity team make more update for thats two type of cpu ( infeneon and spd )
ps= no hard feeling just for beter update !
vikingvxr
12-19-2008, 04:32
thats the fact of infinty soft , they can detect but can't do anything than ! specialy for infineon cpu and spd !
please infinity team make more update for thats two type of cpu ( infeneon and spd )
ps= no hard feeling just for beter update !
you dont need update, but you need spiderman for infineon and spreadtrum chip.
juwanapati
12-20-2008, 02:30
you dont need update, but you need spiderman for infineon and spreadtrum chip.
he he he he he, i already have that box and cpf dongle too , but i also need this lovely box (infinity ) make full suport for this two CPU !
semarang banjir ndak bos vikingvxr musim hujan ini ?
.::BHATTI::.
12-24-2008, 13:55
Cpu Information :
7880
1.86
3XG
60802
Flash Ic Info :
SPANSION
71GL032A40BFOF802VVL51
CHINA
04 spansion
Pinfinder Log:
software version: 1.15
cable type: 1x18 (L18A)
platform: PMB: Infineon e-gold
searching adapter at COM3...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold (820000)
result: Rx:11 Tx:12
time required: 84 sec
Power On !
Pana01 Log :
COM3 [VCP0] selected
module v1.57
Device: LG-KG375
Checking data, wait...
Action: read flash
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:011A
Connecting Done
Check hardware ...
sw version: .00 ULC2GL r 0 A 0 q
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: D:\Program Files\InfinityBox\Pana01\LG-KG375_eeprom-static_20081224-173936.B1E.bin
loading data...
data loaded
imei: ˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙
reading eeprom-security_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙...
file saved: D:\Program Files\InfinityBox\Pana01\LG-KG375_eeprom-security_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙_20081224-173936.B1E.bin
reading eeprom-complete_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙...
file saved: D:\Program Files\InfinityBox\Pana01\LG-KG375_eeprom-complete_˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙_20081224-173938.B1E.bin
backup critical area Done
Check memory ...
reading flash...
file saved: D:\Program Files\InfinityBox\Pana01\LG-KG375_flash_20081224-174243.B1X.bin
completed
Finished, time used: 210 sec
Remove/Install battery now !
Flash File Rapid Link:
http://rs64.rapidshare.com/files/176372749/LG-KG375_flash_20081224-174243.B1X.bin
i have NOKLA E90
already send
may can faster supported infineon cpu ;)
step :
1. Run Infinity-Box "Pana01" module
2. Select "I-Mobile 100" model
3. Read full flash
4. send the next information to InfinityBoxSupport@gmail.com
txs
May you give me Pinout for this Phone. Pinout 1-20 like Samsung D800
gsmsikar
01-18-2009, 18:48
i have phone which uses infineon CPU ,
my pinfinder can detect the pinout ,
but i donno which INFINEON CPU is used in it ,
is there any way to identify the infineon CPU, without opening the phone ?
InfinityHelp
01-21-2009, 22:21
i have phone which uses infineon CPU ,
my pinfinder can detect the pinout ,
but i donno which INFINEON CPU is used in it ,
is there any way to identify the infineon CPU, without opening the phone ?
hello!
no methods to detect exact CPU type without disassembling phone
NITESH CHANDAN
02-07-2009, 16:52
software version: 1.17
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:4 Tx:2
time required: 9 sec
Power On !
can you help me how to flash this cpu with infinity ?
NITESH CHANDAN
02-07-2009, 16:53
software version: 1.17
cable type: 1x8 (L8A)
platform: PMB: Infineon e-gold
searching adapter at COM4...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:4 Tx:2
time required: 9 sec
Power On !
can you help me how to flash this cpu with infinity ?
NITESH CHANDAN
02-10-2009, 07:40
How to read or format infineon 7880 cpu in (ztc km380c) with infinity donlgle some body help me?
maplegsm
02-23-2009, 10:17
here is readed full flash Modle is chinese K808+
http://rapidshare.com/files/201488538/K808_.html
pinout is on pcb
BR;)
UMER
ADDOUL0101
04-09-2009, 01:10
je veut déblocé mon toshiba avec l'infinity-box mais je ne sait pas comment!!!
aide moi svp
shakir hashmi
05-09-2009, 21:11
hi there i got zt6668 i try to read but get this error phone is dual sim and there is one chip name anyka
COM7 [VCP1] selected
module v1.65
Device: LG-KG375
Checking data, wait...
Action: read flash
Boot ...
Press and HOLD Power button now !
e-gold: A0
loading...
error: can't run preloader:
Release Power button now
Boot Failed
Finished, time used: 5 sec
Remove/Install battery now !
shakir hashmi
05-20-2009, 08:06
hi there i got zt6668 i try to read but get this error phone is dual sim and there is one chip name anyka
COM7 [VCP1] selected
module v1.65
Device: LG-KG375
Checking data, wait...
Action: read flash
Boot ...
Press and HOLD Power button now !
e-gold: A0
loading...
error: can't run preloader:
Release Power button now
Boot Failed
Finished, time used: 5 sec
Remove/Install battery now !
plz reply infinity support
Mang mel
08-31-2009, 13:16
Hello,
If you have new models with Infinieon CPU (f.e. 7880), we can try to support these models.
What to do:
1. Run Infinity-Box "Pana01" module
2. Select "LG KG375" model
3. Read full flash
4. send the next information to InfinityBoxSupport@gmail.com
4.1. phone model name and CPU chip name
4.2. pinout information
4.3. "operation.log" file
4.4. full backup file
We will check your information and will try to add new model
any news for this model?
InfinityHelp
08-31-2009, 22:07
hello!
not yet, sorry
nyokafey
09-03-2009, 13:36
what obout spd phone?