View Full Version : ZTC 518 2nd CPU
usernome
05-19-2008, 13:55
Cannot connect to second CPU to do format :
COM4 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6205:8B00]...
CPU: MT6205
high speed boot disabled
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 98 sec
Remove/Install battery now !
Thanx !
usernome
05-19-2008, 16:56
Can you help me please ?
InfinityHelp
05-19-2008, 21:38
hello!
when you connect with second MCU you must hold power button pressed very long.
Even if phone first part will startup- you still must keep it pressed
usernome
05-20-2008, 10:12
I know that but it doesn't work ...
InfinityHelp
05-20-2008, 21:16
helllo!
make complete format instead
usernome
05-21-2008, 09:38
I did that and it worked . I changed IMEI back to what it is on back-side but I still got a little issue : the signal strength on 2nd SIM is not shown .
Thanx !
anil2006
05-21-2008, 10:47
Sir plz help..................
How to unlock MODELABS?
Modele:MTV3.3
InfinityHelp
05-21-2008, 21:38
hello usernome!
have you changed IMEI on first MCU?
InfinityHelp
05-21-2008, 21:38
mr. anil2006: can you be little more detailed?
kirpiksk
05-21-2008, 23:47
Cannot connect to second CPU to do format :
COM4 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6205:8B00]...
CPU: MT6205
high speed boot disabled
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 98 sec
Remove/Install battery now !
Thanx !
hi bro
I little speak english but method mode2 selected and insert phone battery again no pinfinder Vcc
usernome
05-22-2008, 09:37
hello usernome!
have you changed IMEI on first MCU?
I did that ! The IMEI is the one on the back-side .
usernome
05-28-2008, 15:10
Can I do something else , please ?
InfinitySupport
05-28-2008, 17:11
Double check imei's for 1st and 2nd CPU.
Do you see both imei's by *#06# ?
usernome
05-28-2008, 19:32
I cannot see 2 IMEI's . only one ...
InfinitySupport
05-28-2008, 20:31
@usernome
What was initial problem with phone ?
Why you wanted to format it ?
usernome
05-29-2008, 10:23
The phone was restarting .
InfinitySupport
05-29-2008, 18:04
The phone was restarting .
Did you tried to make emergency call without sim-card ?
What is the results ?
usernome
05-29-2008, 19:22
The phone works OK now but I cannot see the signal strength on second SIM .
usernome
06-02-2008, 10:34
Is there something that I can do ?
Thanx !
Bela_Zmija
06-19-2008, 11:02
Hello,
I have same problem with one phone...
Is there any solution for this?
Best Regards