View Full Version : MPEG4 pin rx ,tx plz help me
pawan_verma51
05-21-2008, 08:10
sir
MPEG4 pin rx ,tx plz help me
here is pic
InfinityHelp
05-21-2008, 21:32
hello!
are you sure that this phone is based on MT62xx family processor?
what is connector type?
pawan_verma51
05-22-2008, 08:18
sir
this phone is based on MT62xx family processor
SOKET 6*2 AND 1,12, GROUND
InfinitySupport
05-22-2008, 11:33
sir
this phone is based on MT62xx family processor
SOKET 6*2 AND 1,12, GROUND
Do you know where is +battery and Charge pins at phone connector ?
shyjupanil
07-29-2008, 16:05
i have same handset ...pls help me
InfinityHelp
07-29-2008, 20:01
hello guys!
i can help you with advice how to find pinout just by using multimeter in 5minutes.
i am also haveing same handset ...pls help me
InfinityHelp
07-31-2008, 12:00
hello guys!
please take multimeter, set it to voltage measuring mode.
set one multimeter to some grounded phone part, with another measure voltage on all 12 phone pins.
batery must be in phone ofcource.
when you will see voltgages between 2,7-2,9 volts- those pins are tx/rx
pugazhendhi
08-03-2008, 11:47
PINOUT FOR MPEG 4 IN ABOVE PICTURE MOBILE
searching adapter at COM3...
adapter found, version: 2000
Serial No:
done
Initializing...
done
Cable: 2x6 (L12B)
Power Off !
software version: 1.11
cable type: 2x6 (L12B)
platform: NXP: OM6357EL4
searching adapter at COM3...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 20
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
result: Rx:2 Tx:8
time required: 8 sec
Power On !
BUT THAT CPU INFINITY NOT SUPPORT
ONLY PINFINDER DETECT PIN DETAILS
PLEASE REPLY INFINITY TEAM..........
THANKS
InfinitySupport
08-03-2008, 22:42
Hello,
This phone is not supported yet.