Mang mel
05-30-2008, 06:42
COM1 [Serial0] selected
Device: Coral-200
Checking data, wait...
Action: flash write
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
error: can't run main loader:
Finished, Remove/Install battery now !
Time used: 6 sec
Mang mel
05-30-2008, 06:58
OK.
INTERFACE ERROr now ok
COM11 [VCP0] selected
Device: Coral-200
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 00EC:22A0
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: G:\backup_Coral-200_eeprom-sta_20080529-215744.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: G:\backup_Coral-200_eeprom-sec_20080529-215750.B1E.bin
reading [eeprom-complete]...
file saved: G:\backup_Coral-200_eeprom-complete_20080529-215800.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 49 sec
Unlock instruction:
1. Power-On phone
2. Enter code: 12345678