junior15i
06-02-2008, 18:56
hi i have problem with my u880, when i bought it i dosent wonna start so i flashed it useing 2+5+power but now i have only yellow screen and pc dosent see phone, please help
when press power = yellow screen
when press "2" + "5" + power = only 3g logo
when press "1" + "*" + "#" + power = yellow screen
Before you flash phone make sure USB Drivers are installed and Media has correct county code
How to change Media Country Code
1. Download and install Hex Workshop
2. Run Hex Workshop, click file, open and select the media image
3. Ctrl+F a window will popup, under type select text string, under value type in FLEX_COUNTRY_CODE=
4. Change the value of "FLEX_COUNTRY_CODE=" to your country code
0:UK, 1:IT, 2:HK, 3:SW(sweden), 4 U(Australia), 5:AU(Austria), 6 E(denmark)
5. To change click infront of the number and put the desired value in. Make sure there is nothing overwritten
V10 + V11
1. Hold buttons 2 + 5 and connect USB Cable
2. Phone will display 3 logo
3. Release buttons
4. Run LGMDP
5. Click Select Port
6. When phone is detected click connect
7. A window should pop up, select erase EFS
8. Then press start
9. After complete Remove battery and take out USB CABLE, after 10sec insert battery again and connect USB Cable (should display 3 logo), then detect phone on LGDMP
10. Insert Modem, Media and Module image and click start to begin flashing process
11. DONE!!
junior15i
06-08-2008, 22:47
I trying it, but dont working.
narangmoga
06-09-2008, 03:16
then check y exect ver to flash set will must ok otherwise set have hardware prob