PDA

View Full Version : Z-530i cid52 converted dead (Solution)

hosanan
06-02-2008, 20:29
This procedure is for z530i converted to cid52 and after successful attempts bad it erases (dies).
setool in the Box when not repair it.

Below the procedure to recover the same in DreamBox

* Execulte the Software v3.5 or more of its DreamBox

* In select mobile phone Z530i

* In Accesse select Mode (test point)

* Go in Aba (Misc)

* Check the FullFlesh

* Write in Clik Full Flesh
Finish the wait Flesh

* Check the Gdfs

* Write in Clik Gdfs
Wait finish the Gdfs

* Go the tab (Security)

* Clik on (Execulte''''Security Bypass Operations)
vai opinion on the screen to cn fzr Test Point.

* In select Access Mode (Security Bypass)

* Clik on (Unlock And Repair GDFS Security Blocks)


Feito.Celular successfully repaired!


http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6115&stc=1&thumb=1&d=1212427418 (http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6115&d=1212427418) http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6116&stc=1&thumb=1&d=1212427418 (http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6116&d=1212427418) http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6117&stc=1&thumb=1&d=1212427418 (http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6117&d=1212427418)
hosanan
06-18-2008, 19:05
..............
http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6306&stc=1&thumb=1&d=1213808414 (http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6306&d=1213808414)http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6307&stc=1&thumb=1&d=1213808414 (http://www.abcdotecnico.com.br/vbulletin/attachment.php?attachmentid=6307&d=1213808414)
harim_1981
06-19-2008, 07:46
good work........................keep it up.:)
hosanan
06-19-2008, 15:40
There is some SE that after flesh
setoolbox or in the Cruiser
that is onscreen WAIT...

the above procedure also serves to remedy this defect
hosanan
06-19-2008, 17:24
There is some SE that after flesh
setoolbox or in the Cruiser
that is onscreen WAIT...

the above procedure also serves to remedy this defect


I made a quote to correct the error above

moderators or administrators please edit the post
grateful!
rrim11
06-21-2008, 18:18
Please I wishes for a full flash z530i and thank you davonce
hosanan
06-21-2008, 20:27
Flesh Z530i_cid51

Dowload
http://rapidshare.com/files/124062453/FullFlesh_z530i_cid51.rar
rrim11
06-21-2008, 20:35
thanx very very match
hosanan
06-21-2008, 20:47
after the flesh and you write a good gdfs

gdfs z530 Cid 51

Link- http://forum.gsmhosting.com/vbb/showpost.php?p=3352497&postcount=107