s500 red blink but can´t coonect [Archive]

malacatonche

06-03-2008, 01:00

Hi, I have a brand new, S500 with redblink problem, but i can´t connect
see the log:

-- Reading Info---------------------------------------------------------------
User selected phone S500 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

Nothing more.
How can i connect? in this state I have one more w580
br.

Malacatonche

alfox

06-03-2008, 04:28

please check and clean your contacts from cable to phone.clean the interface where we insert the cable so it will have good contact.also check that you connect the right wire to its positive terminal.

malacatonche

06-03-2008, 13:51

all is ok, the phone never was selled, I made others and all okey but i have problem in this two phones, both with the same error.. any other sugestion?
br

TICTAC_M

06-04-2008, 02:03

is posible that all gdfs is danger. doing test point and write new gdfs - ok. after it unlock/repair and flash main+fs+custom pack.

malacatonche

06-04-2008, 05:00

I can´t do anytest point, as U can see in my first post. I don´t have any chance of do tp or other process becouse the soft give error inmediatly.
br
malacatonche

harim_1981

06-04-2008, 07:51

is it stops in 97%......................?

mughalG

06-04-2008, 09:18

hi
also have a problem with w880i
conecting ok with setool using UFS but
not conecting with dream box???????????

mughalG

06-04-2008, 09:30

is it stops in 97%......................?

Nopsssssss 00%:mad:
not conecting with dream

malacatonche

06-04-2008, 16:32

same problem, no connect 0% with dream with mt and setool connect good

renzox

06-04-2008, 19:10

same problem with a k810 and right now with a k790, red blink, dont connect at all:

http://www.gsmhosting.com/vbb/showthread.php?p=3372011#post3372011

somebody face and succed in solution form this problem?

Info---------------------------------------------------------------
[04/06/2008 08:20:02] User selected phone K790 using Test Point boot mode
[04/06/2008 08:20:02] 1) Turn OFF the phone.
[04/06/2008 08:20:02] 2) Connect the phone to DreamBox cable.
[04/06/2008 08:20:10] Warning : Aborted by user.
[04/06/2008 08:20:10]
[04/06/2008 08:20:37] --- Reading Info---------------------------------------------------------------
[04/06/2008 08:20:37] User selected phone K790 using Normal boot mode
[04/06/2008 08:20:37] 1) Turn OFF the phone.
[04/06/2008 08:20:37] 2) Connect the phone to DreamBox cable.
[04/06/2008 08:20:44]

when message connect phone to dreambox appear, phone just red blink, dont read anything

try with other and read ok, i checked pins, right possitive, box drivers, etc etc all goes fine with another phone.

B.R

hyber_99

06-04-2008, 22:19

@renzox

the problem with those phones is on fast port,

but this problem is not the same:
-- Reading Info---------------------------------------------------------------
User selected phone S500 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

i have a w850 with:

Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed

in this phone i only detach the DB and then works fine:(
i don't know why? but woks:(

soshan

06-05-2008, 00:22

[quote=malacatonche;3367011]Hi, I have a brand new, S500 with redblink problem, but i can´t connect
see the log:

-- Reading Info---------------------------------------------------------------
User selected phone S500 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

hiting on flash ic then chech battri connector dream box is the best father

renzox

06-05-2008, 01:04

@renzox

the problem with those phones is on fast port,

but this problem is not the same:

i have a w850 with:

in this phone i only detach the DB and then works fine:(
i don't know why? but woks:(

hyber_99, already try with 2 port sockets, same result, clean pcb connector and same, what it could be?

B.R

hyber_99

06-05-2008, 01:07

try rehot the fast port (ic's, caps, resistor, etc)

regards;)

malacatonche

06-05-2008, 01:08

me too, two ports, two pcs, and can´t connect, and almost brand new phones.
the problem isn´t the flash chip becouse I can flash with other tools
Br.

hyber_99

06-05-2008, 01:24

me too, two ports, two pcs, and can´t connect, and almost brand new phones.
the problem isn´t the flash chip becouse I can flash with other tools
Br.

but your problem maybe is a bad connection:) (check your cable)
because you can flash it with another tool

harim_1981

06-05-2008, 07:00

@renzox

the problem with those phones is on fast port,

but this problem is not the same:

i have a w850 with:

in this phone i only detach the DB and then works fine:(
i don't know why? but woks:(

please explain more....what is fast port...

also explain " i only detach DB "

waiting...thanks sir

hyber_99

06-05-2008, 17:52

@harim_1981

i only unplug my dream box, and plug in again;) i don't know why, but works 100%

and the fast port: charge ways (ic's, capacitors, resistors, etc)

bluffmaster

06-05-2008, 18:23

Hi, I have a brand new, S500 with redblink problem, but i can´t connect
see the log:

-- Reading Info---------------------------------------------------------------
User selected phone S500 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

Nothing more.
How can i connect? in this state I have one more w580
br.

Malacatonche

Its a Hardware Problem. Mean Flash Ic Problem.
You Need To Rehot/preheat or Change Flash IC.

Tested More Than 12 Units.

Rgds
Bluffmaster

mughalG

06-08-2008, 08:39

no any answer from support:confused:

GSM Dream

06-09-2008, 17:29

Hello!
We need more information.
1. DBSS version
2. DBSS logs (all *.log files from Program Files->DreamBox folder)
3. What procedure do you want to do, and why

malacatonche

06-10-2008, 18:50

thanks for answere
DBSS version is: 3.5
this is the link of .log files

http://rapidshare.com/files/121482301/DreamBox.rar

I want to repair, uploading a valid GDFS, the phone is red-blinking
br.
Malacatonche

hamidian

06-10-2008, 21:18

Hi, I have a brand new, S500 with redblink problem, but i can´t connect
see the log:

-- Reading Info---------------------------------------------------------------
User selected phone S500 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

Nothing more.
How can i connect? in this state I have one more w580
br.

Malacatonche

try to heat ic 2012 and flash and be working 100%

GSM Dream

06-11-2008, 12:22

thanks for answere
DBSS version is: 3.5
this is the link of .log files

http://rapidshare.com/files/121482301/DreamBox.rar

I want to repair, uploading a valid GDFS, the phone is red-blinking
br.
Malacatonche
You can try to do "Execute to Security Bypass Operations", maybe this will help you.
But I think this is hardware issue.

GSM Dream

06-11-2008, 12:23

thanks for answere
DBSS version is: 3.5
this is the link of .log files

http://rapidshare.com/files/121482301/DreamBox.rar

I want to repair, uploading a valid GDFS, the phone is red-blinking
br.
Malacatonche
You can try to do "Execute to Security Bypass Operations", maybe this will help you.
But I think this is hardware issue.

mobilcaretheni

04-03-2009, 08:50

sir w580 is heat when call and * butoon also not working. pls help

hyber_99

04-03-2009, 19:30

@mobilcaretheni

it´s a hardware problem.

that´s all.

regards