nokia 6120flashfile

[habibkhalil]

please upload flashfile cm nokia6120

cpu mt6225

2 simcard
connector 1...8

read flash fails

flashtype

EC257E25082501:18A59F00000000

thanks

[InfinityHelp]

hello!

this is not software version.
please make "read detailed information" and post here log

[habibkhalil]

hello!

this is not software version.
please make "read detailed information" and post here log

here's cm nokia 6120 detail inform log

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:4903:000E
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18A59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18B09FA518B09FA518B09FA518B09FA518B09FA518B09FA5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:18A59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
.................................................. ......
can't detect fat record name location
ffs element #1 detection failed
detecting ffs structure pass 2...
.................................................. ......
can't detect fat record name location
ffs element #2 detection failed
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Finished, time used: 80 sec
Remove/Install battery now !

[InfinityHelp]

hello!

this is ".old firmware type w/o identification"
use Read General information instead

[habibkhalil]

hello!

this is ".old firmware type w/o identification"
use Read General information instead

how can i read general information phone should pwr/on & phone dead

any other help & i flash it with file of support

flash ok but not pwr/on

[InfinityHelp]

hello!

i think your phone firmware is damaged, this is why we cant read it out.
please post here picture of phone, maybe someone will recognise it and advice which flash file can be used