PDA

View Full Version : cect F200+ pinout plz

asco777
06-04-2008, 21:55
hello
help for this pinout plz cect F200+
connector 1...18
gnd pin 18
regard
asco777
06-05-2008, 15:15
urgentttttttttttttttt
InfinitySupport
06-05-2008, 19:47
Hello,

Where is Charge pin at phone connector ?
InfinityHelp
06-05-2008, 22:52
hello!

is this MT62xx based phone?
asco777
06-06-2008, 10:46
hello
yes it is MT6226 cpu
InfinityHelp
06-06-2008, 12:03
hello!

do you have pinfinder? if no- i can advice how to find pinout by multimeter
asco777
06-07-2008, 17:15
I have pinfinder but it can't detect

too many retries
too many redtries
connection w/adapter lopst during set tx as pin 7
failed to detect pins
InfinityHelp
06-08-2008, 12:58
hello!

probably this phone use test points on PCB
habeebo
09-04-2008, 14:42
software version: 1.14
cable type: 1x18 (L18A)
platform: PMB: Infineon e-gold
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
s-gold2 (C0)
result: Rx:13 Tx:2
time required: 75 sec
Power On !
asco777
09-04-2008, 22:21
sorry my own is not mtcpu It is spreatrum cpu and I find pinout with pinfinder connec tor 1..18 RX12 TX 13 but I can't make unlock operation because infinity does't support this
any way I hear about SPD 2.09 but I don't undertand