View Full Version : iphone
bpcentergtk1
06-04-2008, 22:34
how to work with infinity in chinese iphone which cable to use plez help infinity supporters
InfinityHelp
06-04-2008, 23:11
hello!
what connector type is used there?
what is a full phone name from backside sticker
bpcentergtk1
06-05-2008, 12:06
ITS connector is same as ipod
the full name in back side is A380 GSM AND OTHER WORD IS WRITTEN IN CHINESE LANGUAGE
InfinityHelp
06-05-2008, 14:58
hello!
i affraid that this is spreadtrum CPU based phone.
it keep pinout under LCD, but can not be repaired by infinity box yet
bpcentergtk1
06-05-2008, 18:45
actually this handset is user locked is there any code from which i can unlock the phone
hello
it is mtk 6225 cpu... with same socket of ipod (32 pin)
any comment ?
pins in row like ipod original socket
InfinityHelp
03-21-2009, 15:31
hello!
i can only advice how to check system connector with a help of multimeter.
tx/rx pins will show voltage 2,7-2,9 volts
hello!
i can only advice how to check system connector with a help of multimeter.
tx/rx pins will show voltage 2,7-2,9 volts
hello,,, more explain if u wanna ... best regards.
InfinityHelp
03-27-2009, 22:55
hello!
1. set multimeter to voltage measuring.
2. check bettery voltage, it should be more than 3,7volts
3. set one multimeter probe to some grounded phone part
(if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal)
4. with second probe touch one by one all phone pins (phone battery attached)
(to get better result i would advice to set needle on the end of second probe)
memorise pins with voltage between 2,7-2,9volts.
those are tx/rx
hello!
1. set multimeter to voltage measuring.
2. check bettery voltage, it should be more than 3,7volts
3. set one multimeter probe to some grounded phone part
(if you cant find grounded part outside phone- you need to take out small thin wire from negative battery terminal)
4. with second probe touch one by one all phone pins (phone battery attached)
(to get better result i would advice to set needle on the end of second probe)
memorise pins with voltage between 2,7-2,9volts.
those are tx/rx
hello......
for step (4) "battery attached,,, should while measure pins, phone be on ?? or just attach battery only without powering it on" ???
thanks for ur useful info.
InfinityHelp
03-28-2009, 16:33
hello!
you will get correct result in a both ways.
attached or attached & powered
really ... thanks for ur greatest info.
best regards and more progress