View Full Version : Problem with Anycool T808 and Pin Out
Bela_Zmija
06-05-2008, 12:26
Hi to all!
I need help with Pin Finder. Thing is Pin finder is giving me RX-12 and TX-10 for Anycool T808. Now, with this pin out I can flash, format, change IMEI... But I can't find pin out for second CPU. When I try with pin out RX-9 and TX-7 (this pin out is given in pin out folder>Chinese miracle) nothing is happening. Same thing when trying to format with pin out which is given for 2nd CPU (10-Rx, 6-Tx). Does any one knows what is all about?
Best Regards
P.S. Bottom line is, I want to format 2nd CPU because I have problem with 2nd SIM...
InfinityHelp
06-05-2008, 15:04
hello!
for CPU2 set manualy pins 13 & 9 and if not work- swap them between each other.
Bela_Zmija
06-05-2008, 15:26
I tried but still nothing.... I don't understand what could be wrong :mad:
Any thing else, maybe?
InfinityHelp
06-05-2008, 22:59
hello!
do you know that to get connection on CPU2 you must hold power button about 1 minute.
keep it pressed even if phone swith On. Only after phone will completly started- you will get CPU2 connected.
In other words- dont panik when phone switch On- this is starting First MCU part.
Keep button pressed- and you will get connection
Bela_Zmija
06-06-2008, 14:40
Thank you for your help!
I have managed to format CPU2 (thanks to you ;)), I used RX-6 and TX-10
but in this way only works when I check "pin reverse" in Pin-Finder.
But now I have another problem. A lot of them are not powering up, they start to power and in power up screen they goes off. So, I'm confused again... Do you have any idea?
Best Regards
Bela_Zmija
06-06-2008, 14:44
Thank you for your help!
I have managed to format CPU2 (thanks to you ;)), I used RX-6 and TX-10
but in this way only works when I check "pin reverse" in Pin-Finder.
But now I have another problem. A lot of them are not powering up, they start to power and in power up screen they goes off. So, I'm confused again... Do you have any idea?
Best Regards
Just to make clear, they are not powering up when I'm trying to format 2nd CPU.
Bela_Zmija
06-06-2008, 14:52
Thank you for your help!
I have managed to format CPU2 (thanks to you ;)), I used RX-6 and TX-10
but in this way only works when I check "pin reverse" in Pin-Finder.
But now I have another problem. A lot of them are not powering up, they start to power and in power up screen they goes off. So, I'm confused again... Do you have any idea?
Best Regards
Just to make clear, they are not powering up when I'm trying to format 2nd CPU.
InfinityHelp
06-06-2008, 16:29
hello!
if phones are not powerable On from box power- you must set capacitor:
http://www.gsmhosting.com/vbb/showpost.php?p=3276573&postcount=20
Bela_Zmija
06-09-2008, 10:44
I have set capacitor but still have 4,40 V on output. And nothing is changing, phone start powering and after 2 or 3 seconds goes off...
InfinityHelp
06-09-2008, 17:45
hello!
disable sounds by pressing & holding #
sounds are taking too much power, sometimes PC can not provide so much.
hello!
disable sounds by pressing & holding #
sounds are taking too much power, sometimes PC can not provide so much.
this way is always success.
some china phone is power off when startup sound, even i use good external power supply.
Bela_Zmija
06-17-2008, 10:35
hello!
disable sounds by pressing & holding #
sounds are taking too much power, sometimes PC can not provide so much.
Hello, just to say that is working now. Thak you very much on your help.
Best Regards