PDA

View Full Version : K550 white lcd after gdfs writing

sim-tel
06-06-2008, 01:51
Hi
I write gdfs to K550 and phone not start only show white lcd and dont expire
I try also write full flash and the same
Is ane chance to repair this phone
help me please
sharaz191
06-06-2008, 07:05
full flash k550 bin format......................
minkoi
06-06-2008, 09:02
full flash k550 bin format......................

please send full flash k550 bin format, thanks
sim-tel
06-06-2008, 10:32
I write fullflash in bin format 64mb and the same
foufou34
06-06-2008, 10:35
what is the box used.......................
if setool go to buckup fil and restor the buckup
GSM Dream
06-06-2008, 12:07
Hello!

1. Download the fullflash file K550
2. Choose model K550 in DBSS
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Security Blocks."
8. Go to Flash tab & flash: Main+FS+Custpac.

If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...
sim-tel
06-07-2008, 09:45
Hello!

1. Download the fullflash file K550
2. Choose model K550 in DBSS
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Security Blocks."
8. Go to Flash tab & flash: Main+FS+Custpac.

If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...

I write all but I cant write custompack. So it must be hardware problem
Thanks for help
harim_1981
06-07-2008, 16:28
I write all but I cant write custompack. So it must be hardware problem
Thanks for help

can you post the flashing log....
minkoi
06-08-2008, 08:54
Hello!

1. Download the fullflash file K550
2. Choose model K550 in DBSS
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Security Blocks."
8. Go to Flash tab & flash: Main+FS+Custpac.

If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...

no fullflash file K550 on the support
GSM Dream
06-09-2008, 18:27
Try to use this file (http://forum.gsmhosting.net/vbb/showpost.php?p=3251839&postcount=54).