K810 stage 2 TP problem

[mughalG]

k810 red light blink stage 1 clear easly
but alwys error with stage2

chip id 5060MOYOBO


--- Security Bypass------------------------------------------------------------
User selected phone K810 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356127-01-995990-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.

[GSM Dream]

Wrong testpoint connection.

[mughalG]

No sir tp is ok did many sets before but this is not working :( always timeout detected :(

anyhow will try to use different sw versions may be this helps :-s


BR

[Alkapone]

Be sure that there is MOYBO not MOYBE, because you always will get same error. Try stage2 testpoint from moybe ...

B.R.
Alkapone

[GUDO-GSM]

k810 red light blink stage 1 clear easly
but alwys error with stage2

chip id 5060MOYOBO


--- Security Bypass------------------------------------------------------------
User selected phone K810 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356127-01-995990-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.hi..have u try hold it after connected ur tp dont disconnected ur tp after prossing tp...;)