k610 redblink after write gdfs

[mj_0990]

hello
i have k610 only redblink after write gdfs with dbse
before write gdfs the phone can connect with dbse and any flasher box
but now it can't connect with dbse and any flasher box
what should i do to make this phone alive

[GSM Dream]

Hello!

1. Download fullflash file for K610
2. Choose model K610 in DBSS
3. Select Access Mode - Test Point
4. Go to Security tab & Execute " Security Bypass" Operation
5. Select Access Mode - Security Bypass
6. Go to Misc tab & Write Full Flash (look in p.#1)
7. After flashing go to Security tab & make "Unlock & Repair GDFS Sec. Blc."
8. Go to Flash tab & flash: Main+FS+Custpac.

If that not help to You so it is HW problem - LCD, FlexCable, Flash IC, water damage etc. ...

[titan_wonder]

hello
i have k610 only redblink after write gdfs with dbse
before write gdfs the phone can connect with dbse and any flasher box
but now it can't connect with dbse and any flasher box
what should i do to make this phone alive

try trick's..make short + - for 3seconds ,,try 2/3 times...

[mj_0990]

try trick's..make short + - for 3seconds ,,try 2/3 times...
yes i already this trik and phone can connect perfect on dbse
but after tp stage 2 the phone can't connect again
can't detect flash chip :D
i try to reball the flash chip but its not change anything

--- Reading Info---------------------------------------------------------------
User selected phone K610 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Error : Failed.

on setool it said

SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
err: 45 (13)
loader prologue returns invalid status
Can't load ID loader !
Elapsed: 16 secs

if flash chip damage it usualy said phone is black

[mj_0990]

i need to know the value of this capasitor

[TICTAC_M]

read it post, it can help you.

http://www.gsmhosting.net/vbb/showthread.php?t=548242

[sharaz191]

err: 45 (13)

flash chip damage..replace new flash chip

[harim_1981]

is that may be TPs short circuited...