100% Unlock Sagem Infinity Pinfinder

[turan alom]

CABLE TAYP =1X16(L16B)
RX-9 PINFINDER good work
TX-10
select pin out from lisi=Sagem-my150x


COM4 [VCP0] selected
Device: Sagem-my150x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check hardware...
flash chip supported
sw version: EAI_ID EAI_ID_160807_1140 Ag Bh ` f
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sta_20080612-040840.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-sec_20080612-040843.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my150x_eeprom-complete_20080612-040851.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 76 sec
Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

[InfinitySupport]

Thank you very much for test report !
Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

[harim_1981]

yes it is needed for further references....

[lion4000]

sagem my220x can't unlock . i put sim in phone and enter 12345678 but not unlock. and i unlock it withe auther tool.
*******************
Current model: Sagem-my220x
Ready
COM81 ready
COM81 [USBSER000] selected
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sta_20080421-231851.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sec_20080421-231856.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-complete_20080421-231902.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 1
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 50 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678
******************

[harim_1981]

sagem my220x can't unlock . i put sim in phone and enter 12345678 but not unlock. and i unlock it withe auther tool.
*******************
Current model: Sagem-my220x
Ready
COM81 ready
COM81 [USBSER000] selected
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sta_20080421-231851.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-sec_20080421-231856.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220x_eeprom-complete_20080421-231902.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 1
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 50 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678
******************

ya counter blocked fones cant be unlocked thru Infinity

[gsmxpert]

pinfinder detected correct pins on sagem phones

[gsmsolutionsl]

hey,
I unlocked (sp lock) 2 sagem successfully but
It can t remove unlock code (my 200x , my 150x) What is the solution ?????

[f164]

good unlock for these phones tested many times except blocked counter phones

[shakeelajmal]

i have the same problem with my 150x unlock done but still asking for phone code

what should i do?
BR

[InfinityN]

i have the same problem with my 150x unlock done but still asking for phone code

what should i do?
BR

Good day !

Read eeprom and send backup files to InfinityBoxSupport@gmail.com with problem description. Our programmers will check your file.

[zahaf]

hi!!
how to unlock security code in sagem my200x
i have pinfinder and its cables
i want to know witch cable to use and the pins

thanks

[InfinitySupport]

Hello,

Please, check list of supported models: www.infinity-box.com

[nitin28]

how to unlock security code in sagem my200x

[InfinitySupport]

Hello,

Please, check list of supported models: www.infinity-box.com