t280i dead

[ahmertelecom]

i want to unlock t280i i click to sp unlock after booting complete phone dead and not complete process i try 10 times but same now what can i do
Device: Sony-Ericsson-T280i
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
Finished, time used: 83 sec
Remove/Install battery now !

[harim_1981]

is that your battry is fully charged....?

[InfinitySupport]

It can not be true that phone become dead because as I can see from log it was made no changes in phone memory.
So, just charge phone battery and phone will be "alive"

[ahmertelecom]

i check with supply my phone battery was fully charged but phone was not on i flash phone with support firmware and flex file but same position

[InfinitySupport]

@ahmertelecom
Please, read and understand my previous words: http://www.gsmhosting.com/vbb/showpost.php?p=3392460&postcount=3

if you still have problem with phone it's good idea to post here all your steps so we will be able to understand what is the real problem with phone.

[ahmertelecom]

Device: Sony-Ericsson-T280i
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89890400040089:89890400000000
flash: 89890400040089:89890400000000
flash: Intel 256MBit AD-mux U 32Mb
Check hardware done
Read data...
reading Sony-Ericsson-T280i_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\backup_Sony-Ericsson-T280i_eeprom_calibration-1_20080613-212940.80E.bin
Read data done
Check data...
Check data done
Writing...
.................................................. ..............
.................................................. ..............
error: unknown structure, read flash and send to support !
Writing fail
Finished, time used: 202 sec
Remove/Install battery now !
i say not unlock complete after show this

Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
Finished, time used: 83 sec


i write epprom again and flash phone but no luck now what can i do

[InfinitySupport]

Please, explain phone history from begin up to end.
What was with phone when you got it, what you have tried to do etc...

[ahmertelecom]

i recieve phone to customer for unlocking sp lock phone was vrgin network lock i unlock phone with infinity but unlocking opertion not complete

Device: Sony-Ericsson-T280i
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 89890400040089:89890400000000
flash: 89890400040089:89890400000000
flash: Intel 256MBit AD-mux U 32Mb
Check hardware done
Read data...
reading Sony-Ericsson-T280i_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\backup_Sony-Ericsson-T280i_eeprom_calibration-1_20080613-212940.80E.bin
Read data done
Check data...
Check data done
Writing...
.................................................. ..............
.................................................. ..............
error: unknown structure, read flash and send to support !
Writing fail
Finished, time used: 202 sec
Remove/Install battery now !



i try to flash phone with support firmware and flex but no luck gettiing eror
advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot fail
Finished, time used: 83 sec
Remove/Install battery now !

itrying to restore epprom but no luck writng epprom phone dead i check with supply

after i set baudrate to 115200 phone going to flash i flash phone with firmware and flex file but phone dead now what can i do

[InfinityN]

Hello,

Try to write back original eeprom backup.
If you can write firmware you are able to write eprom too

[ahmertelecom]

i write epprom but same phone dead

[ahmertelecom]

thnx for your replyies my problem solved with this device

http://www.gsmhosting.com/vbb/showthread.php?t=553284


i hope you improved your software in future

[vi element]

thnx for your replyies my problem solved with this device

http://forum.gsmhosting.com/vbb/showthread.php?t=553284


i hope you improved your software in future


Have same problem here,,,,

But infi box still cant fix the problem..
The phone recongize as dead phone / damage imei (se***l) and boot failed (using infi box).

Please make this probelm solution. couse no other team can fix this.
just become 1st in the world for fixing this problem

thx b4

[bibi019]

how i can fix dead t280i after flash it become dead
demage imei and TA missing