plz help infinity fly sl399e

[m s s spk]

hi infinty i have done before this phone but that phone failed at boot procedure i have searched here but could not find a way plz told me what can i do and what is the problem here is the logs
COM1 [Serial0] selected
Device: Fly-SL399E
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B02:8B01]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:75C1:E13E
boot step size: 0400
error: bootcode load error: FFFFEAFF0000E10F10C0E3A00001E180F000E12F1010E59F10 04E241D00CE59F0003EB000796EB00FFFDEAFF140040006000 40004030E92D
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 6 sec
Remove/Install battery now !
i m tries but not read it not flashed it help

[InfinitySupport]

1. double check your cable !
2. press and hold phone "power" button long time !
3. if still no luck set "boot step" value to 2 ("settings" software page)

[m s s spk]

1. double check your cable !
2. press and hold phone "power" button long time !
3. if still no luck set "boot step" value to 2 ("settings" software page)
sir i have a cable problem so why he deducted thourgh direct method code and secong thing is that i have follow all your procedure but still same problem

[InfinitySupport]

As I can see you have used not Infinity-Box unibox as a cable but another cable.
Try to build RJ45 cable for Infinity-Box

[m s s spk]

As I can see you have used not Infinity-Box unibox as a cable but another cable.
Try to build RJ45 cable for Infinity-Box
hello infinty i have done nothing the cable is same and pinout is also same and no need for any changes but i have done one thing that i have download new mmodule2.24 from support and then tried it and now i m succeed so iwant to know that if the version problem or what here is the ok phone logs
COM1 [Serial0] selected
Device: Fly-SL399E
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6219:8B02:8B01]...
CPU: MT6219
CPU: MT6226MA detected
chip: 0031:75C1:E13E
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: B0001D00000000:B0001D00000000
flash: Sharp Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: SL390M_MERID_UK_PCB01_GPRS_MT6226M_S01.SL390M.06A. W06.36.MP.V36.F2.BIN
ver. sw2: SL390M.06A.W06.36.MP.V36.F2, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[SL390M_MERID_UK_PCB01_GPRS_MT6226M_S01.SL390M.06A. W06.36.MP.V36.F2.BIN]]...
file saved: C:\Program Files\InfinityBox\MModule\eeprom[SL390M_MERID_UK_PCB01_GPRS_MT6226M_S01.SL390M.06A. W06.36.MP.V36.F2.BIN]_20080616-144922.B0E.bin
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Area: Firmware
flash: B0001D00000000:B0001D00000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
Finished, time used: 2207 sec
Remove/Install battery now !
reply me infinty what is the problem before

[sahil2000ind]

Thanks For The Nice Log

[InfinitySupport]

@m s s spk
What is the reason to ask about old problem ?

Main rule is: Infinity-Box programmers work every day to make software better and better, make support for new hardware types every day, make support for new flash types every day, make support for new software versions every day.
You need to make only one thing: download daily updates and be happy.

[m s s spk]

@m s s spk
What is the reason to ask about old problem ?

Main rule is: Infinity-Box programmers work every day to make software better and better, make support for new hardware types every day, make support for new flash types every day, make support for new software versions every day.
You need to make only one thing: download daily updates and be happy.
i do infinity that u said anyway i m still your user

[piyushgsm]

How to unlock Fly-SL399E:
1. make eeprom and full flash backup for emergencey case
2. make "smart safe" unlock procedure
3. if phone still locked flash it with this firmware ("Fly-SX305" folder in support area): Fly-SX305_SL390M_MERID_RU_PCB01_gprs_MT6226M_S01.SL390 M.06A.W06.36.MP.V36.F2_E6.02R_En_Ru_Ua