PDA

View Full Version : 5210 impossible to flash it !! :(

GYZMO
09-07-2002, 21:59
i received a 5210 , when i power on the phone the screen light , but stay power on ( no insert sim card ...nothing on the screen)

so i try to flash it with windls 4.1 by xpmobile ...impossible

when i poush power on the phone ...loading flash loader ...ERROR setting flash mode ...

any one can help me pls ??
thks
best regards

GYZMO

mathnag@hotmail.com
ICQ: 79265415
duron850ph
09-08-2002, 02:52
use Knok Phoenix to flash/backup phone
set imei, quick set faid, sfs, sp locks, etc.
GYZMO
09-08-2002, 20:30
when i use knok phoenix :
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
Cannot prepare phone

i think the phone is dead :(

best regards


GYZMO
legija
09-08-2002, 21:51
No, it's not.
GeeZuZz
09-09-2002, 00:55
Have you tried Rolis flasher 478b?

I don't understand why people use Knok. Rolis is 10X faster and better.

It took me an hour to backup a 6210!
tomeo
09-09-2002, 19:09
Just use Xp mobile 2002 or Knok Phoenix (select phone model 5210) to make backup from the other phone than flash the backup to your phone and Bingo Your phone is Alive (if that's no hardware failure). If don't work please cek your cable connection and printer port setting in BIOS must Normal or ECP+EPP
GYZMO
09-09-2002, 19:21
i give back the phone , that was a hardware failure :(

thks for your help anyway

GYZMO
Dave.W
09-10-2002, 18:22
Originally posted by GeeZuZz
Have you tried Rolis flasher 478b?

I don't understand why people use Knok. Rolis is 10X faster and better.

It took me an hour to backup a 6210!

rolis has no support for 5210........

as for this phone, sounds like water damage to me:(
GeeZuZz
09-10-2002, 23:35
In Rolis 478b I can select 5210 (NSM-5) in the dropdown menu
Dave.W
09-11-2002, 01:19
478b6 has no 5210, maybe there is a newer build?
fofodaman
09-11-2002, 12:26
Rolis has 5210 on the menu, but it hands out a dead set.

Knock works for 5210, Rolis does not.
Salami1_1
09-11-2002, 23:34
I know your prob :)
I had the same you have wrong connector!!
It does fit but pins are not correct! Just look at them!
The rounds on PCB are not matching with pins on your connector...
you need newer connector to work with 5210..

WBR

Salami1_1
WizeMan
09-14-2002, 22:03
the connector for 5210 is same type as 8210/8850