need cect-c1000+ pinout

[farhanali]

cect-c1000+ pinout


please pinout cect- c1000 with 2 sim with 2 memory card

connector 1............18

thanks

[farhanali]

pic for this phone.


thanks

[owoeye]

[quote=farhanali;3417853]pic for this phone.


hope infinty supporters sees this.i have tried more than 10 times with pinfinders to even unlock it.all i observe was that it has spreadtrum chip.hope to hear from them

[gsmxpert]

did this phone via mtk pinfinder............................

[farhanali]

software version: 1.10
cable type: 1x18 (L18A)
platform: SPD: Spreadtrum SC6600M, SC6600R
searching adapter at COM4...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
Rx:12
result: Rx:12 Tx:13
time required: 57 sec
Power On !

my phone do not accept sim card.need format or flash
Spreadtrum SC6600M, SC6600R base IC.
I think no have suport infinity box for this phone.what i do for this phone.for solve this problem.

[mov009]

cect-c1000+ pinout


please pinout cect- c1000 with 2 sim with 2 memory card

connector 1............18

thanks

HEAR IS PROSIDURE BROTHER:-
hi here is the way 2 make oun chinese miracle cable by hand already tested in 30 to 40 hand set sussesfuly
1st u need com cable of moto C115 cut the pin of moto u will get 3 wire white and blue and black in my cable black is
ground and white is RX and blue is TX just open the set and find out the RX and TX there is way 2 find out in set RX and TX
just put the charger on TX u will find out 1.7 or 2.7 and on RX u will find out 2.8 or 1.8 voltage
or just dounload the latested pinout 4rm fourm mostly nokia set u will find on pcb witten on that so its a easy 2 find
out RX and TX and connet on infinity dont make format option first just read full flash and its work perfect then 2
desire option
its important 2 find out rx and tx plz make operation veary carefully
use it u r oun risk
thanks

[owoeye]

software version: 1.10
cable type: 1x18 (L18A)
platform: SPD: Spreadtrum SC6600M, SC6600R
searching adapter at COM4...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
Rx:12
result: Rx:12 Tx:13
time required: 57 sec
Power On !

my phone do not accept sim card.need format or flash
Spreadtrum SC6600M, SC6600R base IC.
I think no have suport infinity box for this phone.what i do for this phone.for solve this problem.


is it cect 1000+ with pinfinder

[al_khawaga2000]

gooooooooooooooood dddddddddddd