View Full Version : Sigmatel S3 Wrong.......
SIR
I FLASH THE PHONE THIS FILE:=-GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103_16m_En_Ru_Fr_Th_Vn_Ar.B0M.b
FLASH SUCCESSFULLY BUT SET SHOW ?WRONG? SIR PLESE TELL WHAT CAN I DO?
THIS IS LOG:- COM6 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:4803:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN
ver. sw2: FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1.0.006_080103, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN]_20080622-200402.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 90 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
Sandeep9669
06-22-2008, 22:15
I think you flashed phone with wrong file,
what is the right flash file brother?????????
if phone dead try to complete format after press power button for 1minute if not iam having readed file i will send u dont worry
mobilecraker
06-23-2008, 07:52
first use the backup file then use other file frm support
himanshu taldar
06-23-2008, 07:54
i think it is showing u "error" on display....but it is normal
SIR
I FLASH THE PHONE THIS FILE:=-GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103_16m_En_Ru_Fr_Th_Vn_Ar.B0M.b
FLASH SUCCESSFULLY BUT SET SHOW ?WRONG? SIR PLESE TELL WHAT CAN I DO?
THIS IS LOG:- COM6 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:4803:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN
ver. sw2: FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1.0.006_080103, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_006_080103.BIN]_20080622-200402.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 90 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
where are you in india
InfinitySupport
06-23-2008, 10:30
@mov009
I am little bit surpriced with your actions...
@ndavid
if you have new files, please, send it to mt62xx@gmail.com so we will be ble to upload good files in Infinity-Box support area for all users
@all
before make any operation with any "Chinese" phones it is need to make full flash backup for emergency case !
i am in west bangle calcutta. my email id is:- mobileking2007@rediffmail.com
i have them in spider man format
but i am e mailing to u both.
infinity team i also have same problem regarding this.i m also giving u logs of my set.i format my phone .plz tell me why every sigmatel set shows error on screen after formating.this is shown only after formatting now new coming handsets of sigmatel gives error also camera module not ready problem.when i repair this problem by code *### problem repeat after 3 days.i have sold lots of handsets before 4 or 5 months.no problem in those handsets.plz tell us perfect solution.which information u want i will give u that.if u want old & new flash file i will give u.plz do something for this problem. thanx i m waiting ur reply. 6205-6227 NOR
Done
WARNING ! Settings will be cleared, user data erased, Device: Autodetect ei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:0103:0004
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_013_080306.BIN
ver. sw2: FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1.0.013_080306, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E40000
Detected eeprom/ffs address is non-standard: 00E40000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E40000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 001C0000
ffs chip: 00
eeprom/ffs area: 00000000:00E40000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_013_080306.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_013_080306.BIN]_20080623-060254.B0E.bin
flash: 01227E22202200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:18E59F00000000
Finalization Done
Finished, time used: 233 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
alltime243
06-23-2008, 20:19
i am from delhi my id is alltime23@yahoo.com please send me file
InfinitySupport
06-23-2008, 21:10
@jai2008
the most interesting question for me is: if after code repair phone works for 3 days why phone become damaged again after 3 days ?
Do you have any idea about this situation ?
pappu siddiqui
06-23-2008, 22:07
After Formating Sigmatel S3 ....camera Module Not Ready Err.....
Plz Help Infinity Team.......
himanshu taldar
06-23-2008, 22:12
type *### then select choose type senser ... then click ok on gieweki and press ok noe use camera it will work 100%
InfinitySupport
06-23-2008, 22:27
Please, see some information here: http://www.gsmhosting.com/vbb/showthread.php?t=544808
but where is the file :- GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_013_080306.BIN in support area????????
Chandreshswami
06-24-2008, 05:14
use search............
harim_1981
06-24-2008, 05:53
but i am e mailing to u both.
Is it recovering the "error" fault using the flash file....that you sending...
if yes...please send to thie mail ID too....
harim_1981@yahoo.co.in
thanks bro.
InfinitySupport
06-24-2008, 07:00
For best results and solutons for "Chinese" models, please, post your questions regarding "Chinese" models in this forum: http://www.gsmhosting.com/vbb/forumdisplay.php?f=425
use search............
are you success this flash file, if yes post your log , and your file sand to this id
mobileking2007@rediffmail.com if no plese don't
missgide other member,
but i am e mailing to u both.
where is your file in my id friend?
sunamuni_1985
06-24-2008, 08:30
i think it's a frent camera opction
problam .....
i think it's a frent camera opction
problam .....
no camera is ok i take pitcher
@jai2008
the most interesting question for me is: if after code repair phone works for 3 days why phone become damaged again after 3 days ?
Do you have any idea about this situation ?
sir i also dont know.also 1 problem i faced i have not told u yesterday.after 3 or 4 visits of customer set gone to be dead.after formating it will be alive.also i have tested mmc does not contain any virus.first i think about virus in mmc so it gives error but i was wrong.any body have any perfect solution of error shown in sigmatel.plz reply soon.its urgent . sir also tell me my logs shown that detected eeprom/ffs address is not standard. why it shows me this error.is there any formatting problem that i have formated wrong address or any other .
InfinitySupport
06-24-2008, 21:30
Here is a big discussion and experience about this problem: http://www.gsmhosting.com/vbb/showthread.php?t=544808
Chandreshswami
06-25-2008, 05:32
are you success this flash file, if yes post your log , and your file sand to this id
mobileking2007@rediffmail.com if no plese don't
missgide other member,
Dear you are asking that where is this file ??
THIS WAS YOU POST
but where is the file :- GINWAVE25_06B_PCB01_GPRS_MT6225_S00.FXD-S3_FOREIGN_MR106_004_5S-MC-C01-RF3198_V1_0_013_080306.BIN in support area????????
MY ANSWER
im saying use serch button to find it and also attched screnshot where it is located in support area
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=157164&d=1214277270 (http://www.gsmhosting.com/vbb/attachment.php?attachmentid=157164&d=1214277270)
i never told you that im succes with that file and you also not asked anywhre in that post about succes or log of that file
you asked for that version and i just help to find u
WHERE IS IM MISGUIDING YOU???
BRO YOU ARE MISGUIDING YOURSELF
(http://www.gsmhosting.com/vbb/attachment.php?attachmentid=157164&d=1214277270)